Android (Orange OS) not booting on Orange PI PC
Has anyone been able to successfully boot Android on a OrangePi PC ?according to the UART output it looks like it can't find uImage/script.bin
(It does show the logo during boot)
I used the "sun8iw7p1_android_orangepi_pc_uart0_v0.8.0.rar"
and followed these instructions: http://www.orangepi.org/Docs/SDcardinstallation.html#Install_Android_OS_image
UART output:
HELLO! BOOT0 is starting!
boot0 version : 4.0.0
boot0 commit : 368945ad3c87c1814bfe3eea5aab3ffc0e9d2d5c
fel_flag = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
DRAM DRIVE INFO: V1.3
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
READ DQS LCDL = 0020201f
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 672 MHz
DRAM zq value: 003b3bfb
DRAM dram para1: 10f40400
DRAM dram para2: 00000000
DRAM workmode1: 000009f4
DRAM SIZE =1024 M
odt delay
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 4
: mmc driver ver 2015-04-13 16:07:39
: ***Try SD card 0***
: SD/MMC Card: 4bit, capacity: 15307MB
: vendor: Man 00744a45 Snr 00002219
: product: USD
: revision: 1.0
: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 000dc000.
sum=ede66ee7
src_sum=ede66ee7
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[ 0.370]e mode
U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) Allwinner Technology
[ 0.377]version: 1.1.0
normal mode
[ 0.384]pmbus: ready
not set main pmu id
axp_probe error
[ 0.399]PMU: pll1 1200 Mhz,PLL6=600 Mhz
AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[ 0.429]DRAM:1 GiB
relocation Offset is: 35af9000
read rtc = 0x0
mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC: 0
[ 0.503]: mmc driver ver 2014-12-10 9:23:00
[ 0.508]: get sdc_phy_wipe fail.
[ 0.512]: get sdc0 sdc_erase fail.
[ 0.516]: get sdc_f_max fail,use default 50000000Hz
[ 0.521]: get sdc_ex_dly_used fail,use default dly
[ 0.527]: SUNXI SD/MMC: 0
[ 0.540]: *Try SD card 0*
[ 0.573]: CID 0x744a4555 0x53442020 0x10000022 0x1900bc55
[ 0.578]: mmc clk 50000000
[ 0.582]: SD/MMC Card: 4bit, capacity: 15307MB
[ 0.587]: boot0 capacity: 0KB,boot1 capacity: 0KB
[ 0.592]: ***SD/MMC 0 init OK!!!***
[ 0.597]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
[ 0.602]: secure_feature 0x0
[ 0.606]: secure_removal_type0x0
[ 0.610]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
disp_init_tv
disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
disp tv device_registered
unable to find regulator vcc-hdmi-18 from or
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
boot_disp.auto_hpd=1
auto hpd check has 0 times!
error: open disp_rsl.fex, maybe it is not exist
attched ok, mgr0<-->device0, type=4, mode=4----
ready to set mode
[ 1.489]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:14-
-name- -start- -size-
bootloader: 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 30000000
misc : 34000000 1000000
recovery : 35000000 2000000
sysrecovery : 37000000 30000000
private : 67000000 1000000
Reserve0 : 68000000 1000000
klog : 69000000 1000000
Reserve1 : 6a000000 2000000
Reserve2 : 6c000000 1000000
cache : 6d000000 28000000
UDISK : 95000000 0
-----------------------------------
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_mmc boot_normal
[ 1.591]: MMC Device 2 not found
[ 1.595]: Can not find mmc dev
[ 1.599]: read first backup failed in fun sdmmc_secure_storage_read line 1849
sunxi_secstorage_read fail
get secure storage map err
the user data'magic is bad
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
f_read btr over hd12896
read byte = 3686456
[ 1.806]screen_id =0, screen_width =1280, screen_height =720
[ 1.812]frame buffer address 46400000
[ 1.816]Hit any key to stop autoboot:0
** Unable to read "script.bin" from mmc 0:1 **
** Unable to read "uimage" from mmc 0:1 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Edited by almeric at 2015-12-12 19:45
lymon, it seems that you using bad image on your micro sd card,or you not have sufficently power from power supply :) almeric replied at 2015-12-12 19:42
lymon, it seems that you using bad image on your micro sd card,or you not have sufficently power fro ...
don't think that's the problem as I use the same PSU to boot debian, ubuntu and openelec and these all work fine.
I also tried 4 different SD cards and still no go.
It's probably just not meant to be..:lol
Edited by almeric at 2015-12-17 12:12
it looks like image you use is corrupted, i faced with similar problem, when i replace image, boot process work well. Please tell me, whatnative resolution that have your monitor? share your experience.how to set own resolution, not 1920x1080-60. My monitor resolution is 1280x1024-60. Best settings that i have is 1280x720-60, this resolution i reach with manipulation with fex file and convert themto script.bin with sunxi.tools. It looks like all developers working with hdmi monitors with 1920x1080-60 and support other resolutions they not care about. I connect my orange pi pc to old VGA monitor with hdmi to VGA converter. Sorry for my bad english. my image is empty, no have partition data:
fdisk -l sun8iw7p1_android_dolphin-p1_uart0.img
Disk sun8iw7p1_android_dolphin-p1_uart0.img: 544 MiB, 570442752 bytes, 1114146 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes i wish to have some diamond necklace but they are quite expensive;; Alo789
fashion jewelries will be one of the best stuffs that you can use to enhance your personal style’ https://s689.co/
This is a topic near to my heart cheers, exactly where are your contact details although? https://nohu90.dev/
Your blog is amazing dude, i love to visit it everyday. very nice layout and content . cakhiatx trực tiếp bóng đá
This will be the appropriate weblog for really wants to check out this topic. You know much its virtually tricky to argue along with you (not that I personally would want…HaHa). You actually put a new spin using a topic thats been revealed for decades. Wonderful stuff, just wonderful! Theanex UK