English | 中文

What’s Orange Pi R1 Plus LTS?


It’s an open-source single board computer. It can run Android 9、Ubuntu、Debian、 OpenWRT.It uses the Rockchip RK3328 SoC, and has 1GB LPDDR3 SDRAM.

orangepiR1Plus_en.jpg

What can I do with Orange Pi R1 Plus LTS?


You can use it to build…
  • A computer
  • A soft router
  • A wireless server
  • Music and sounds
  • A speaker
  • Android
  • Scratch
  • Pretty much anything else, because Orange PiR1 LTS Plus is open source.

Who’s it for?


Orange Pi R1 Plus LTS is for anyone who wants to start creating with technology – not just consuming it. It's a simple, fun, useful tool that you can use to start taking control of the world around you..


Hardware specification

CPU

Rockchip RK3328
Quad-Core ARM Cortex-A53 64-Bit Processor, Main Frequency Speeds Up To 1.5GHz

GPU

Mali-450MP2
Supports OpenGL ES 1.0/2.0

Power management chip

RK805

Memory(SDRAM)

1GB LPDDR3(Not Shared With GPU)

Onboard Storage

• Micro-SD Card slot
• 16MB SPI Flash

Onboard Network

10M/100M/1000M Ethernet (YT8531C)
10M/100M/1000M USB Ethernet (RTL8153B)

Video Output

TV CVBS output(Via 13pin interface board)

Audio output

3.5mm audio port(Via 13pin interface board)

Power Source

USB Type-C Interface 5V/2A Input

USB

1x USB 2.0 HOST

Low-level peripherals

13pin header with IR pin、Tv-out、AUDIO(no MIC), 2xUSB2.0(not support)and 1 GPIO port Note: 13Pin Headers Will Not Be Welded

Debug serial port

UART-TX、UART-RX and GND

Button

1x Reset Button

Fan interface

1x cooling fan interface (5V)

LED

Power LED & Status LED

Supported OS

Android 9、Ubuntu、Debian、OpenWRT

Appearance specification introduction

Dimension

56mm×57mm

Weight

29.5g

Orange Pi™ is a trademark of the Shenzhen Xunlong Software CO., Limited

Copyright © 2016 Xunlong Software CO.,Limited All Rights Reserved.
粤ICP备14086627号