Raspbian for OrangePi_2G-IOT
Edited by zoums at 2017-8-25 18:43This image only support OrangePi_2G-IOT boot form SDCARD.
This image have Autorun the wvdial, you must insert the SIM card before boot.If it failed,you can exec:
sudo wvdial Tom &
Download the image：
DietPi_OrangePi-2G-IOT_sdcard.img_20170809002743.7zhttp://pan.baidu.com/s/1skUxIX3 password：嗯e
Download1https://mega.nz/#!hBI0RD7Z!cJjCud0DXRlWLpk63NYTbNRma_XBHoty7cuubUp5jfo
Download2https://raw.githubusercontent.com/zoums/zoums.github.io/master/image/DietPi_OrangePi-2G-IOT_sdcard.img.7z
bugs:
usb host is failed (When i turn thetiny DIP switches to on, the usb host is bridge to the micro usb. But i still could not use it).
Notes：
1.Username: ( root/dietpi ) Password: ( dietpi ).
2.Network config is in the /boot/network . Because of '/boot' is fat partition, you can change it in the 'Windows' or 'Andriod'.
3.UART baudrate: 921600.
4.The source of software is slowly in some areas, You can change the '/etc/apt/source.lists' and find a faster address in there:
http://www.raspbian.org/RaspbianMirrors
5.You can find Kernel image And uboot image in The /boot/kernel_uboot, This is a backup, you can use it to make the other system base from linux.
6.When i install the libc6/gcc, there cause a err of readlink, You can exec：sudo rm -f /usr/bin/readlink7.If you want to use gpio of WiringPi, You can read Official user manual or exec：git clone https://github.com/OrangePiLibra/WiringPi.git
cd WiringPi
sudo ./build OrangePi_2G-IOT
sudo ./build OrangePi_2G-IOT install
8. If you have csi camera , you can try to exec ' sudo modprobe rda_cam_sensor ' , and you can exec ' dmesg ' to find err log.
9.You can enable USB host by switching all the tiny DIP switches next to the USB host adapter to ON (1-8, all in the up/ON position)(1-8 to on) .
10.This image is include the linux headers , you can complite the driver in this board.
Armen replied at 2017-8-10 19:12
I think that Shenzhen need buy that and share with us or give us another support
Shenzhenis Xunlong?
Xunlong pays!!
Armen replied at 2017-8-10 19:12
I think that Shenzhen need buy that and share with us or give us another support
I know where I was wrong, and I wouldn't buy it if it was me. I will talk to ShenZhen about the technology.Thank you.
zoums replied at 2017-8-10 13:45
Your Private messages:
"zoums
But jusy now, my partner wish the image sells for 300$ to 500$, i think this is expensive, but I have no choice."
Ask between 300 $ and 500 $ for private message for an image that supposedly installs on the NAND of a board that is worth 13 $. Do you think we are crazy? Notice to all: this is like the Guinean consul scam
Your armbian "DIET" edition "or SCAM edition":
Its really possible to install LINUX to NAND? Edited by zoums at 2017-8-11 10:13
Sorry. Too much pressure . I don't want to get into trouble.
I have sent a pm.. please repply 300-500$ :D in same price I can by notebook(or GPD) with installed OS on SSD Armen replied at 2017-8-10 18:33
300-500$in same price I can by notebook(or GPD) with installed OS on SSD
300 $ -500 $ a weekend passional with the couple in a good hotel
I think that Shenzhen need buy that and share with us or give us another support
page:
[1]
2