monnier post at 2015-6-30 21:01:28

Which TRRS cable

Since the "TRRS video+audio" connector is anything but standardized, it would be very helpful to state clearly which version this is (e.g. is it the same as the Raspberry Pi B+, and/or the Banana Pro, and/or this and that DVD player or cell phone) or even point to some known-to-work cables.
O
Personally, I'm only interested in the audio output, so if someone could point me to an adapter that turns the Orange Pi Mini's 3.5mm female TRRS composite+audio into a 3.5mm female TRS audio, that'd be great.

fritz post at 2015-8-16 05:42:24


:)

sabareeshbc post at 2015-7-1 18:34:55

Anybody please reply

monnier post at 2015-8-16 01:07:32

I got my OrangePi-mini and for lack of an answer, I just tried to plug an audio (TRS) thingy into the TRRS slot, and the audio comes out correctly, so it looks like the TRRS used is either (from tip to sleeve):

- Left, Right, Video, Ground.
- Right, Left, Video, Ground.
- Left, Right, Ground, Video.
- Right, Left, Ground, Video.

magicse post at 2015-8-16 02:21:09

Edited by magicse at 2015-8-15 20:25

sabareeshbc replied at 2015-7-1 12:34
Anybody please reply
https://pp.vk.me/c625428/v625428268/3c828/5gn_I8prLLc.jpg
Yellow - video
White -audio
Red - audio

stp5k post at 2015-11-24 11:07:57

Hi all, Is it possible to change the pinout in software/os so I can use a different cable?
Most cables have ground on ring2.


thanks
Steven

crazykill post at 2015-12-15 06:38:12

You cannot change the pinout on the board and usuallythe ground is on the most back ring near the plug.One thing you can do is cut the cable and chage the wiring.

bodtx post at 2018-9-10 19:01:01

I miss plugged a TRS cable into this, so Video was shortcuted to ground, I could hear the sound but with strange glitches (comes from video output)
I hope I did not destroy the Video output.
I will use a 4 pole Male to extract only the audio as I use HDMI output for video.
page: [1]
View full version: Which TRRS cable