Orange PI PC raspbian support
Hi. I have a question. Does orange pi pc support raspbian ? I haven't found image of raspbian for dowload here http://www.orangepi.org/downloadresources/ in orange pi pc section. Maybe i can download it but from other version section. Should it work with orange pi pc ? Maybe it works but it isn't in orange pi pc section ? But if other raspbian images are not compatible with OPi PC - when You are going to add support for it ? raspbian Orange Pi2 works, try it.you can load the new kernel pack
but the keyboard special keys are different.
Yes it works, but i have another problem. Only one USB port works. Does someone have a solution for that ? kris85 replied at 2015-10-8 00:18
Yes it works, but i have another problem. Only one USB port works. Does someone have a solution for...
I have the same problem with Orange Pi PC on image Raspbian_For_OrangePi2_mini2_v0_8_0 !
It works only one lower USB slot :(
Edited by Sergei at 2015-10-10 19:41
On Debian the same problem resolved so - http://www.orangepi.org/orangepi ... =480&page=1#pid4344
I checked it on my Orange PI PC , all three ports work
Thanks to youMy Orange PI PC was working.
USB 3Ports.I tried download script_kernel.tar.gz read this url.
http://www.orangepi.org/orangepi ... =viewthread&tid=342
and unzip script_kernel.tar.gz
Rename these files
script.bin.OPI-PC_1080p60 to script.bin
uImage_OPI-2 to uImage
copy them to the boot partion of my sdcard
Did you were able to use all usb ports using raspbian with that method?, or now you are using Debian? Could you please tell me which exacly image you use?
I tried with raspbian for orange pi 2 mini, and this image dont work for me ;/
Edited by kris85 at 2015-10-14 20:11
You must know that raspbian image is different from debian for example Jessie image. In debian we must replace both files uimage and script.bin. At now, I don't remember - in raspbian image is only one file - uimage or script.bin ( as I said, I don't remember at now, I don't have access to images now), so I think, this method will work on images where originally are both files. Edited by Sergei at 2015-10-14 21:23
epoch replied at 2015-10-14 06:38
Did you were able to use all usb ports using raspbian with that method?, or now you are using Debian ...
Yes, unfortunately, this fact forced me to use Debian (wheezy) :(
You need to replace u-boot too
RESUME:
1. rewrite u-boot
2. replace uImage
3. write script.bin
4. replace kernel-modules (/lib/modules/.....)
should work
page:
[1]
2