Author: admin

Linux Image for Orange Pi 4G-IOT is avaialble

[Copy link]

1

threads

4

posts

26

credits

Novice

Rank: 1

credits
26
Published in 2019-2-19 04:08:08 | Show all floors
is that pads are the serial console, on the back side of the PCB, next to the SIM socket?
what voltage does it use? 5v / 3.3 ?

0

threads

1

posts

30

credits

Novice

Rank: 1

credits
30
Published in 2019-2-20 23:03:05 | Show all floors
Edited by pieterbusio at 2019-2-20 23:04

Hello. Is it the 4G modem supported in ubuntu?

2

threads

16

posts

264

credits

Intermediate member

Rank: 3Rank: 3

credits
264
Published in 2019-3-1 12:38:40 | Show all floors
I hope to have a version with mainline kernel soon. And a distro like debian or arch

0

threads

4

posts

66

credits

Registered member

Rank: 2

credits
66
Published in 2019-3-5 02:32:56 | Show all floors
redax replied at 2019-2-19 04:08
is that pads are the serial console, on the back side of the PCB, next to the SIM socket?
what volta ...

It is UART, 2V. I connected TX0 to CP2102, RX0 to half divider (470 Ohm+470 Ohm) to CP2102. For link: sudo minicom -b 921600 -D /dev/ttyUSB0

This thread contains more resources

You need to Log in to download or view,No account?    Register

x

0

threads

4

posts

28

credits

Novice

Rank: 1

credits
28
Published in 2019-3-26 16:52:35 | Show all floors
admin replied at 2018-12-6 20:06
Pls login from the serial port. For now linux cant display on the screen

Sir,

Please can you point to which pins are avialble for serial port?


Is it okay if I use USB to UART bridge for connecting to serial port?
https://www.amazon.com/Cenrykay-CP2102-Converter-Adapter-Windows/dp/B07H4KMXDK/ref=sr_1_1_sspa?keywords=usb+to+uart&qid=1553590253&s=gateway&sr=8-1-spons&psc=1

Are pins of serial port 5V tolerable?


0

threads

4

posts

28

credits

Novice

Rank: 1

credits
28
Published in 2019-3-31 17:55:01 | Show all floors
admin replied at 2018-12-6 20:06
Pls login from the serial port. For now linux cant display on the screen

What baud rate?

1

threads

2

posts

103

credits

Registered member

Rank: 2

credits
103
Published in 2019-4-1 16:16:55 | Show all floors
did you try 112500?

0

threads

4

posts

28

credits

Novice

Rank: 1

credits
28
Published in 2019-4-3 17:35:16 | Show all floors
admin replied at 2018-12-6 20:06
Pls login from the serial port. For now linux cant display on the screen

Please can you tell, What needs to be done for GUI over HDMI?

0

threads

4

posts

28

credits

Novice

Rank: 1

credits
28
Published in 2019-4-3 17:36:47 | Show all floors

Its working fine with 1000000 baud rate on putty

4

threads

38

posts

337

credits

Intermediate member

Rank: 3Rank: 3

credits
337
Published in 2019-4-3 18:35:50 | Show all floors
Hi!
I just received the orangepi 3G and I can't r run the modem. I guess that modem device into /dev tree will be the same in both models (3G and 4G)
Which device corresponds with the modem for setting it up with wvdial?
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list