|
Edited by loboris at 2015-9-13 12:46
Tested AP mode, works good using create_ap method.
Before using, install some packages:
- sudo apt-get install git iptables dnsmasq util-linux procps hostapd iproute2 iw haveged
Copy code If you don't want to install git, just download create_ap-master.zip from git or my Mega or GoogleDrive and unpack.
Then run
- git clone https://github.com/oblique/create_ap
- cd create_ap
- sudo make install
Copy code
After that you can use
- sudo create_ap --ieee80211n --ht_capab '[HT40+]' wlan0 eth0 MyAccessPoint MyPassPhrase &
Copy code to start AP
See Examples on git page about how to start AP on boot.
Tested on OPI-PLUS, Ubuntu image, connecting from Android and Windows 10.
|
|