Orange PI PC - Ethernet doesn't work under Android

kulo · Published in 2015-10-15 10:36:08

larson9999 replied at 2015-10-15 08:51
I didn't have another card so I went to the nearest place which does, a Dollar General store. The ...

3 usb ports work？Are you sure？

sky · Published in 2015-10-15 23:51:30

i can confirm this as well

larson9999 · Published in 2015-10-16 02:58:33

kulo replied at 2015-10-15 10:36
3 usb ports work？Are you sure？

Yes, I'm sure.

kulo · Published in 2015-10-16 10:02:16

larson9999 replied at 2015-10-16 02:58
Yes, I'm sure.

Which Android image did you install？

larson9999 · Published in 2015-10-16 10:35:30

The only one I could get to install. The others give me a 'script not found' error in pheonixcard. It's the one linked to in the downloads page. http://www.orangepi.org/download ... 1c8bcf2b9e7b63.html

xivato · Published in 2015-10-17 15:28:37

pjga replied at 2015-10-15 02:42
I found the solution!!!
That's a little bit crazy.
I've checked it and the whole problem on the Oran ...

+1
Had to buy another SD card and worked.
thx

darqoq · Published in 2015-10-17 17:31:16

pjga replied at 2015-10-15 02:42
I found the solution!!!
That's a little bit crazy.
I've checked it and the whole problem on the Oran ...

Holy crap,
how it is possible ? that ethernet works with other card,
especially that the problem was "Initialize hardware error".
Why type/size of card has matters ?

I believe, but It is so fu...ing crazy.

Habi · Published in 2015-10-17 22:28:18

Hello everyone, let me tell you my experience.

I bought an Orange PC for Android development, and a Sony 16 GB micro SD card (SR-16UY).

I installed Android there and everything was fine. I reverted it back to normal and installed Lubuntu, just to try it. Again, everything worked fine. But when I installed Android again, I was stuck with the Ethernet problem! In the SAME SD card once worked!

After two days of trying things, the only one that worked for me was to revert the card to normal, then format it with Windows unchecking the "fast format" option (it took a while!), then putting Android with PhoenixCard again. Now it works without any problem.

Could it be pre-existing data on uninitialized sectors? In any case, I've made an image now that it's working again.

Regards.

larson9999 · Published in 2015-10-17 22:59:09

Habi replied at 2015-10-17 22:28
Hello everyone, let me tell you my experience.

I bought an Orange PC for Android development, and a ...

Maybe this is my problem because most of my cards once had a linux distribution on them. I'll give it a try and report back.

darqoq · Published in 2015-10-19 02:16:36

Habi replied at 2015-10-17 15:28
Hello everyone, let me tell you my experience.

I bought an Orange PC for Android development, and a ...

Confirmed.
Earlier, I try same card with zidoo-x1 android image - ethernet wasn't working.
Today, I tried your method, and ethernet (on same card and the same image) now working.
I don't believe but it works.

So, my conclusion is - not size/type of sd card matters but how SD card is prepared.