PI PLUS Android - from TRONFY X2

goondu

Temperdin replied at 2015-11-17 13:50
I can't get this image to work with VPN apps, has anyone tried?

Yes, I am unable to get this image to work with any VPN apps too, I had tried it with OpenVPN Connect and OpenVPN for Android.Nevertheless, this image is a wonder.

Swell6

I've finally got this working on my OPi PC and it's a great ROM.  Worth mentioning to any others struggling to get this working that the power supply needs to be absolutely right, there's not much latitude for error, as has been reported by others.  I tried a Samsung 5.3V 2A and it would freeze at the Google TV screen during boot.  An HTC 5V 1A kept turning off during boot - understandably - and am now using a PSU as per the spec of 5V 2A which - not surprisingly - works!  Also seems to need a full SD card format as others have said.

One thing that isn't working is the power switch.  It is effective in powering down but won't complete a full boot when powering back up.  Any ideas?  I've installed a Power control app instead.

I also haven't managed to get WiFi working with a couple of generic dongles.  Are there any drivers which can be loaded?

Harald

Wifi:  which wifi USB dongles have you got to work?
How?
I have three different dongles, none I could get to work:
How I tried:
Settings/TurnOff Ethernet/ turnOn Wi-Fi
None of my wifi connections show to my Netware router; none show in Connected Devices.
I tried to boot with dongles in, no LAN wired connections: still none of the dongles (one by one ) worked.
dongles I tried:
Bus 002 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Bus 002 Device 006: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 002 Device 007: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter
Bus 002 Device 008: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter

goondu

Harald replied at 2015-11-22 11:13
Wifi:  which wifi USB dongles have you got to work?
How?
I have three different dongles, none I coul ...

I am unable to get my wifi USB dongle to work too and mine is RTL8188EU.

Have you tried to edit the Android image with Dragon Face?

There are some wifi settings ...

;--------------------------------------------------------------------------------
;wifi/bt/fm/gps/nfc modules configuration
;module_num:
;             0- none
;             1- rtl8188eu(wifi)
;             2- rtl8723bs(wifi+bt)
;             3- ap6181(wifi)
;             4- ap6210(wifi+bt)
;             5- ap6330(wifi+bt)
;             6- ap6335(wifi)
;             7- rtl8189etv(wifi)
;module_power0: axp used by module, "axp22_dldo1" - use dldo1, not use keep it empty
;module_power0_vol: power0 voltage, mv;
;chip_en:       enable chip io
;lpo_use_apclk: ""- not use, "losc_out"- a23/33/H3, "ac10032k1"、"ac10032k2"、"ac10032k3"- a80
;--------------------------------------------------------------------------------
[module_para]
module_num          = 7
module_power0       = "vcc-wifi-33"
module_power0_vol   = 0
module_power1       =
module_power1_vol   =
module_power2       =
module_power2_vol   =
module_power3       =
module_power3_vol   =
chip_en             =
lpo_use_apclk       =

;--------------------------------------------------------------------------------
;wifi configuration
;wifi_sdc_id:    0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
;wifi_usbc_id:   0- USB0, 1- USB1, 2- USB2
;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0)
;wl_reg_on:      wifi function enable pin
;wl_host_wake:   wlan device wake-up host pin
;wl_host_wake_invert: whether wl_host_wake use inverter between ap and module
;                     0: not used, 1: used
;--------------------------------------------------------------------------------
[wifi_para]
wifi_used             = 0
wifi_sdc_id           = 1
wifi_usbc_id          = 5
wifi_usbc_type        = 1
wl_reg_on             = portL07<1><default><default><0>
wl_host_wake          = portG10<0><default><default><0>
wl_host_wake_invert   = 0

;--------------------------------------------------------------------------------
;bluetooth configuration
;bt_used:       0- no used, 1- used
;bt_uard_id:                0- uart0, 1- uart1, 2- uart2
;bt_rst_n:      bt function enable io
;bt_wake:       host wake-up bluetooth device
;bt_host_wake:  bt device wake-up host
;bt_host_wake_invert: whether bt_host_wake use inverter between ap and module
;                     0: not used, 1: used
;--------------------------------------------------------------------------------
[bt_para]
bt_used               = 0
bt_uart_id            = 1
bt_rst_n              =
bt_wake               =
bt_host_wake          =
bt_host_wake_invert   = 0

I had tried to edit the settings and save to another image, unfortunately the new image won't be able to get burn into the sdcard successfully.

Anyway, just share with you my direction in intending to resolve this 'wifi' thingy in my OrangePi PC.

Thanks

jacer

goondu replied at 2015-11-22 12:46
I am unable to get my wifi USB dongle to work too and mine is RTL8188EU.

Have you tried to edit ...

Use this image below only one USB port not working. Wifi works.
https://mega.nz/#!1xZnWKyI!goV_KbZjdCNdHhP0ZXM2OkEYkdG8n2AfK8AmA_MjQMc

Swell6

Just added cooling fins to the processors on my Pi PC and am surprised at how hot they are after 5 mins playing videos. Clearly doing their job. Is this normal or is the ROM running hot?

Temperdin

goondu replied at 2015-11-19 11:37
Yes, I am unable to get this image to work with any VPN apps too, I had tried it with OpenVPN Con ...

I have fixed the VPN issue, you just need to download and install VPNdialogs.apk
I found a version here.

http://forum.xda-developers.com/showthread.php?t=2098531

Dima

Did anyone find how to change the power button to go into sleep mode instead of showing the shutdown dialogue?

goondu

jacer replied at 2015-11-23 12:52
Use this image below only one USB port not working. Wifi works.
https://mega.nz/#!1xZnWKyI!goV_KbZ ...

Thanks. Yup it indeed works.
Wow this image is good, it works with my wireless mouse and ir remote too. If only it works with my wifi adapter, that will be excellent.

jacer

Dima replied at 2015-11-24 18:22
Did anyone find how to change the power button to go into sleep mode instead of showing the shutdown ...

Short press the power button to sleep, long press power button to open the shutdown dialog window.