PI PLUS Android - from TRONFY X2

jacer · Published in 2015-10-30 23:22:56

loboris replied at 2015-10-30 22:41
Ive tested this image on OrangePI-PC. I've had to make some modifications to get it working, but now ...

What modification? Care to share? Would be nice if you post a guide.

melanrz · Published in 2015-10-31 02:19:29

dr_hans replied at 2015-10-30 23:18

Thanks,i try it.

melanrz · Published in 2015-10-31 02:22:51

loboris replied at 2015-10-30 22:41
Ive tested this image on OrangePI-PC. I've had to make some modifications to get it working, but now ...

please share how to mod this file to boot from sd card

melanrz · Published in 2015-10-31 02:33:45

dr_hans replied at 2015-10-30 23:18

It s only update from booted system

melanrz · Published in 2015-10-31 04:35:04

ok,now working with another sd card.testing.

AaronNewcomb · Published in 2015-10-31 05:27:37

loboris replied at 2015-10-30 22:41
Ive tested this image on OrangePI-PC. I've had to make some modifications to get it working, but now ...

What modifications did you make? I was able to write the image to the SD card, but when I boot up my OPi-PC it just says "There's no place like 127.0.0.1". It has been like that for about 20 minutes. Seems stuck.

loboris · Published in 2015-10-31 06:07:02

AaronNewcomb replied at 2015-10-30 22:27
What modifications did you make? I was able to write the image to the SD card, but when I boot up ...

I'll upload the image and give you more information tomorrow.

kingfish600 · Published in 2015-10-31 10:30:23

loboris replied at 2015-10-31 06:07
I'll upload the image and give you more information tomorrow.

I'll be looking fot it. Does it run at 1.2 or 1.6?

AaronNewcomb · Published in 2015-10-31 23:53:16

BTW - I DID finally get this working by using a different SD card. Damn Orange Pi and their stupid incompatibilities. Wasted most of a day on that. Still no wifi and only one USB, but everything else I have tried works and it's pretty fast.

loboris · Published in 2015-11-1 00:24:16

Edited by loboris at 2015-11-1 10:45

UPLOADED image for OrangePI-PC Android_MMK_v1_OrangePI-PC.img.xz, download from Mega.

Slightly modified MMK_v1 for Tronfx X2

sys_config.fex replaced with OrangePI-PC's one
u-boot from another Tronfy X2 image
build.prop modified to enable mass storage device on usb-otg
fstab.sun8i modified to enable auto mount on all usb ports

- All 3 host USB ports & USB OTG works, tested with keyboard, mouse, wireless kbd/mouse, USB Flash drive, USB HD drive
- Ethernet works.
- HDMI audio works, analog audio (audio jack) works
- Power button works
- root ok, Google play ok
- resolutions 1080p & 720p
- Kodi 15.2 OK, Kodi 16.0 alpha ok.
- Antutu v5.7.1 score 23380 (with 1080p resolution)

If you have 1080p monitor, enable 1080p resolution in settings and adjust /system/build.prop, you'll get much better picture quality.
set: ro.hwc.sysrsl=10 for 1080p or 5 for 720pset: persist.sys.disp_density=200
You can set persist.sys.disp_density between 160 and 240 to adjust DPI to your needs.

After first boot, the welcome screen (language selection) is quite unresponsive for couple of minutes, be patient.