please choosego to mobile | Continue to access the PC version
View: 14890|Reply: 7

WIFI not worked

[Copy link]

7

threads

20

posts

138

credits

Registered member

Rank: 2

credits
138
Published in 2016-4-12 03:17:03 | Show all floors |Read mode
When I connect my EPUP 8508 wifi dongle with RTL8188 chipset and power on orange pi one , the wifi led flashed (it shows it had been detecting).
but when I connect to any access point the OPI one immediately reset.
what is wrong ?!
what should I have to do?  

1

threads

14

posts

143

credits

Registered member

Rank: 2

credits
143
Published in 2016-4-12 04:36:35 | Show all floors
I think you need to install firmware-realtek package
  1. sudo apt-get install firmware-realtek
Copy code



7

threads

20

posts

138

credits

Registered member

Rank: 2

credits
138
 Author| Published in 2016-4-30 19:39:26 | Show all floors
Edited by soroush_crazy at 2016-4-30 19:41

After along time I had found a way for this problem.
edit "/etc/modules-load.d/modules.conf"
change '8189es' to  '# 8189es'
add '8192cu' to end of file.

pro more performance and disable power saving creating file with this command:

nano /etc/modprobe.d/8192cu.conf
options 8192cu rtw_power_mgnt=0 rtw_enusbss=0


use crl + x and y for saving.
that will fix problem for wifi with8192cus chipset.
this is source page :

http://forum.armbian.com/index.p ... less-module-8192cu/

13

threads

197

posts

791

credits

Senior member

Rank: 4

credits
791
Published in 2016-5-26 19:02:18 | Show all floors
I have similar problem with ralink card. It always says authentication error. Then reboots. Waste of time.

The same wifi dongle works like a charm on latest openelec build

7

threads

20

posts

138

credits

Registered member

Rank: 2

credits
138
 Author| Published in 2016-9-15 03:50:27 | Show all floors
giaur500 replied at 2016-5-26 19:02
I have similar problem with ralink card. It always says authentication error. Then reboots. Waste of ...

add your wifi chip name (like 8192cu) to end of "/etc/modules-load.d/modules.conf" comment all other wifi chip name by putting # to first of thet line.

2

threads

7

posts

943

credits

Senior member

Rank: 4

credits
943
Published in 2017-1-12 17:13:26 | Show all floors
WiFi Connection ALL OS's ALL PC's NO WiFi DRIVERS NEEDED
http://www.orangepi.org/orangepi ... &fromuid=621355
(from OrangePi)

0

threads

6

posts

46

credits

Novice

Rank: 1

credits
46
Published in 2017-12-6 16:33:02 | Show all floors
Try some simple troubleshoots to fix WiFi connection problem:

         Check that the antennas are fixed well.
         Make sure that the wireless Camera is powered on.
         Ensure that the password is correct.
         Check the SSID in WiFi settings.
         Make sure there is no signal interference.
         Check that the camera has the correct IP address
         Update firmware.

Hope this will help you.

0

threads

18

posts

58

credits

Registered member

Rank: 2

credits
58
Published in 2023-6-15 16:05:56 | Show all floors
Make sure that the EPUP 8508 wifi dongle is correctly connected to the board aa route planner and that there are no physical connection errors. Make sure all connectors are firmly plugged in and that no wires are damaged.
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list