fswebcam for OPI (H3 only)

@lex

I just updated the fswebcam code to be able to set Exposure, Vflip and Hflip contols in case you don't want to gym with kernel.
Grab the code:
git clone https://github.com/avafinger/fswebcam
cd fswebcam
./configure --prefix=/usr --disable-v4l1 --enable-32bit-buffer
make
sudo make install


Some command line samples:
fswebcam --Vflip 1 -r 1600x1200 -p YUV420P - > cam1600x1200_2.jpg
fswebcam --Hflip 1 -r 800x600 -p YUV420P - > cam800x600_1.jpg
fswebcam --exposure 4 -r 640x480 -p YUV420P - > cam640x480_1.jpg


Exposure goes from -4 to 4
Vflip = [0,1] - Flip image Vertically
Hflip = [0,1] - Filp image Horizontally

Enjoy

@lex

@Armen, @y52,

For UVC and H264 camera you can use the fswebcam stock version, it should work.
This modified version is for the CMOS camera only. (GC2035)

About NVR:
I don't know if fswebcam implements complete NVR, but you can use guvcview that records H264 videos using command line arguments.

Armen

Hi
Thanks for great work, one question. is it poseble use usb uvc camera, which don't detect like /dev/video0.

Thanks

y52

I have a H264 camera. How would it be possible to use it with the OPI+ ?
Is there any NVR implementation ?

LinuXperia

Hi!
What good Cameras exist for the Orange PI Pc's
I would like to buy some and use it with this fswebcam software.
Ideally i want to have if possible 5 Mega Pixel Cameras.

Thanks for any helpful Tips and suggestions regarding good working Cams for the Orange Pi's.

gnasch

Hi LinuxPeria

you may want to read this thread, but it is a mixed bag...

http://forum.armbian.com/index.php/topic/1213-ov5640-camera-with-orange-pi/


best, gnasch

LinuXperia

gnasch replied at 2016-9-14 21:11
Hi LinuxPeria

you may want to read this thread, but it is a mixed bag...

Hi Gnasch!
Thank you very much for your helpfull Reply!
Will give then the OV5640 Modules a try in the next Feautre!
Have a great Weekend.