please choosego to mobile | Continue to access the PC version
View: 3068|Reply: 0

Orange PI Zero won't get past loading

[Copy link]

1

threads

1

posts

7

credits

Novice

Rank: 1

credits
7
Published in 2017-3-24 05:45:36 | Show all floors |Read mode
Hello,
I've purchased 2 Orange PI Zero boards.  I've attempted to boot multiple Linux distros on both boards.
The boards are being monitored with thier serial ports with Putty. I have a cable to Ethernet as well (not working)
The listing below is what I see with both boards trying to boot the same O/S.
No Ethernet connection is made by both boards.
Any help  would be greatly appreciated.   

Trying to boot from MMC1                                                      
                                                                              
U-Boot 2017.01-armbian (Feb 02 2017 - 03:04:34 +0100) Allwinner Technology     
                                                                              
CPU:   Allwinner H3 (SUN8I 1680)                                               
Model: Xunlong Orange Pi Zero                                                  
DRAM:  512 MiB                                                                 
MMC:   SUNXI SD/MMC: 0                                                         
*** Warning - bad CRC, using default environment                              
                                                                              
In:    serial                                                                  
Out:   serial                                                                  
Err:   serial                                                                  
Net:   phy interface0                                                         
eth0: ethernet@1c30000                                                         
Hit any key to stop autoboot:  0                                               
6944 bytes read in 147 ms (45.9 KiB/s)                                         
switch to partitions #0, OK                                                   
mmc0 is current device                                                         
Scanning mmc 0:1...                                                            
Found U-Boot script /boot/boot.scr                                             
2652 bytes read in 181 ms (13.7 KiB/s)                                         
## Executing script at 43100000                                                
U-boot loaded from SD                                                         
Boot script loaded from mmc                                                   
123 bytes read in 124 ms (0 Bytes/s)                                          
3790004 bytes read in 540 ms (6.7 MiB/s)                                       
4754648 bytes read in 628 ms (7.2 MiB/s)                                       
** File not found /boot/.next **                                               
** File not found .next **                                                     
35384 bytes read in 492 ms (69.3 KiB/s)                                       
## Loading init Ramdisk from Legacy Image at 43300000 ...                     
   Image Name:   uInitrd                                                      
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)                     
   Data Size:    3789940 Bytes = 3.6 MiB                                       
   Load Address: 00000000                                                      
   Entry Point:  00000000                                                      
   Verifying Checksum ... OK                                                   
Using machid 0x1029 from environment                                          
                                                                              
Starting kernel ...                                                            
                                                                              
[sun8i_fixup]: From boot, get meminfo:                                         
    Start:    0x40000000                                                            
    Size:    512MB                                                                  
ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1                              
ion_reserve_select: ion chipid  [0x2c00042!                                    
ion_reserve_common: ion reserve: [0x57e00000, 0x60000000]!                     
Loading, please wait...
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list