|
Hi all,
OrangePi 2G manual recommends using an 8Gb class10 microsdcard, I use too 4Gb class4, and it take more time to boot. Boot process repeats 2 or 3 times some fhase, this is normal.
To burn SD card, ensure:
- before burn it, umount the drive.
- burn it using dd in linux and wait.
- then it finished force write all changes on disk: sync in linux, and extract safety microsdcard
- if same card fails, may be it has emmc errors, dont use it!
To connect via seial port, user kermit like orange manual, dont use cutecom or other serial program, kermit permits run any command with interactive modes through serial port.
good luck!! |
|