please choosego to mobile | Continue to access the PC version
View: 14851|Reply: 7

Android (Orange OS) not booting on Orange PI PC

[Copy link]

1

threads

90

posts

761

credits

Senior member

Rank: 4

credits
761
Published in 2015-11-18 22:12:45 | Show all floors |Read mode
Has anyone been able to successfully boot Android on a OrangePi PC ?

according to the UART output it looks like it can't find uImage/script.bin
(It does show the logo during boot)

I used the "sun8iw7p1_android_orangepi_pc_uart0_v0.8.0.rar"
and followed these instructions: http://www.orangepi.org/Docs/SDc ... ll_Android_OS_image


UART output:

HELLO! BOOT0 is starting!
boot0 version : 4.0.0
boot0 commit : 368945ad3c87c1814bfe3eea5aab3ffc0e9d2d5c

fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V1.3
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
READ DQS LCDL = 0020201f
DRAM Type = 3 (2DR2,3DR3,6PDDR2,7PDDR3)
DRAM CLK = 672 MHz
DRAM zq value: 003b3bfb
DRAM dram para1: 10f40400
DRAM dram para2: 00000000
DRAM workmode1: 000009f4
DRAM SIZE =1024 M
odt delay
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 4
[mmc]: mmc driver ver 2015-04-13 16:07:39
[mmc]: ***Try SD card 0***
[mmc]: SD/MMC Card: 4bit, capacity: 15307MB
[mmc]: vendor: Man 00744a45 Snr 00002219
[mmc]: product: USD
[mmc]: revision: 1.0
[mmc]: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 000dc000.
sum=ede66ee7
src_sum=ede66ee7
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[      0.370]e mode

U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) Allwinner Technology

[      0.377]version: 1.1.0
normal mode
[      0.384]pmbus:   ready
not set main pmu id
axp_probe error
[      0.399]PMU: pll1 1200 Mhz,PLL6=600 Mhz
AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[      0.429]DRAM:  1 GiB
relocation Offset is: 35af9000
[box standby] read rtc = 0x0
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC:     0
[      0.503][mmc]: mmc driver ver 2014-12-10 9:23:00
[      0.508][mmc]: get sdc_phy_wipe fail.
[      0.512][mmc]: get sdc0 sdc_erase fail.
[      0.516][mmc]: get sdc_f_max fail,use default 50000000Hz
[      0.521][mmc]: get sdc_ex_dly_used fail,use default dly
[      0.527][mmc]: SUNXI SD/MMC: 0
[      0.540][mmc]: *Try SD card 0*
[      0.573][mmc]: CID 0x744a4555 0x53442020 0x10000022 0x1900bc55
[      0.578][mmc]: mmc clk 50000000
[      0.582][mmc]: SD/MMC Card: 4bit, capacity: 15307MB
[      0.587][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
[      0.592][mmc]: ***SD/MMC 0 init OK!!!***
[      0.597][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
[      0.602][mmc]: secure_feature 0x0
[      0.606][mmc]: secure_removal_type  0x0
[      0.610]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
[boot]disp_init_tv
[DISP_TV] disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
[BOOOT_DISP_TV] disp tv device_registered
unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
boot_disp.auto_hpd=1
auto hpd check has 0 times!
error: open disp_rsl.fex, maybe it is not exist
attched ok, mgr0<-->device0, type=4, mode=4----
ready to set mode
[      1.489]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:14-
-name-        -start-       -size-
bootloader  : 1000000       1000000
env         : 2000000       1000000
boot        : 3000000       1000000
system      : 4000000       30000000
misc        : 34000000      1000000
recovery    : 35000000      2000000
sysrecovery : 37000000      30000000
private     : 67000000      1000000
Reserve0    : 68000000      1000000
klog        : 69000000      1000000
Reserve1    : 6a000000      2000000
Reserve2    : 6c000000      1000000
cache       : 6d000000      28000000
UDISK       : 95000000      0
-----------------------------------
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_mmc boot_normal
[      1.591][mmc]: MMC Device 2 not found
[      1.595][mmc]: Can not find mmc dev
[      1.599][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1849
sunxi_secstorage_read fail
get secure storage map err
the user data'magic is bad
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
f_read btr over hd12896
read byte = 3686456
[      1.806]screen_id =0, screen_width =1280, screen_height =720
[      1.812]frame buffer address 46400000
[      1.816]Hit any key to stop autoboot:  0

** Unable to read "script.bin" from mmc 0:1 **

** Unable to read "uimage" from mmc 0:1 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!


0

threads

6

posts

216

credits

Intermediate member

Rank: 3Rank: 3

credits
216
Published in 2015-12-12 19:42:56 | Show all floors
Edited by almeric at 2015-12-12 19:45

lymon, it seems that you using bad image on your micro sd card,or you not have sufficently power from power supply

1

threads

90

posts

761

credits

Senior member

Rank: 4

credits
761
 Author| Published in 2015-12-14 02:38:39 | Show all floors
almeric replied at 2015-12-12 19:42
lymon, it seems that you using bad image on your micro sd card,or you not have sufficently power fro ...

don't think that's the problem as I use the same PSU to boot debian, ubuntu and openelec and these all work fine.
I also tried 4 different SD cards and still no go.

It's probably just not meant to be..

0

threads

6

posts

216

credits

Intermediate member

Rank: 3Rank: 3

credits
216
Published in 2015-12-17 12:05:27 | Show all floors
Edited by almeric at 2015-12-17 12:12

it looks like image you use is corrupted, i faced with similar problem, when i replace image, boot process work well. Please tell me, what  native resolution that have your monitor? share your experience.how to set own resolution, not 1920x1080-60. My monitor resolution is 1280x1024-60. Best settings that i have is 1280x720-60, this resolution i reach with manipulation with fex file and convert them  to script.bin with sunxi.tools. It looks like all developers working with hdmi monitors with 1920x1080-60 and support other resolutions they not care about. I connect my orange pi pc to old VGA monitor with hdmi to VGA converter. Sorry for my bad english.

0

threads

4

posts

32

credits

Novice

Rank: 1

credits
32
Published in 2016-2-2 22:51:19 | Show all floors
my image is empty, no have partition data:
fdisk -l sun8iw7p1_android_dolphin-p1_uart0.img
Disk sun8iw7p1_android_dolphin-p1_uart0.img: 544 MiB, 570442752 bytes, 1114146 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Published in 3 daybefore | Show all floors
i wish to have some diamond necklace but they are quite expensive;;        Alo789
Published in yesterday 05:42 | Show all floors
fashion jewelries will be one of the best stuffs that you can use to enhance your personal style’        https://s689.co/
Published in yesterday 11:24 | Show all floors
This is a topic near to my heart cheers, exactly where are your contact details although?        https://nohu90.dev/
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list