OpenELEC build for OPi PC with support for TV/DVB tuners

warik · Published in 2016-2-11 07:56:29

Edited by warik at 2016-2-11 08:00

@gutek@ you see my previous message? I don't find i2c device in your build. What this it problem? It my error?

@GUTEK@ · Published in 2016-2-11 15:28:13

I compiled support for i2c and w1 as modules. So you have to load them.
For loading i2c - modprobe i2c-dev
You can add to autostart.sh

warik · Published in 2016-2-11 23:43:21

Okay.
Thank you!

chaszim · Published in 2016-2-17 12:02:13

Edited by chaszim at 2016-2-17 12:04

The Realtek Semiconductor Corp's. RTL2832U was very popular with it's $10 price tag, it had 2 chip sets I have the r820 version which it's top freq was over 1 ghz.So, it can be used for many more things, than just as a TV tuner.
This site looks promising to help locating the drivers, http://www.linuxquestions.org/qu ... 20t-dab-4175523334/[/url]
It also looks like the driver are already installed in lunux kernels above "3.2.0-4-686-pae" & "3.2.63-2 i686" but I suppose that's not likely in the ARM version.
I have an RTL2832U but because your not posting a "change log", I'm not complaining that you think your progress is moving too fast to document the changes? But,frankly I don't know which version posted to test because of this. I now have 2 Opi Pc's to work with.

jernej · Published in 2016-2-17 14:54:32

Edited by jernej at 2016-2-17 07:56

chaszim replied at 2016-2-17 05:02
The Realtek Semiconductor Corp's. RTL2832U was very popular with it's $10 price tag, it had 2 chip s ...

You have github commit history for that with all the diffs so you can check what is different. Your DVB should be enabled in the latest image -> CONFIG_DVB_USB_RTL28XXU=m In that case, it would be a too much to write for a changelog, because few 10's of drivers were enabled. Except if you meant @GUTEK@ special build?

Unoqueva · Published in 2016-2-20 06:26:25

@GUTEK@ replied at 2016-2-5 15:18
Dobra to piszemy po polsku
Wolfman
Ja też jestem cienki z linuxa, jedynie udało mi się złoży ...

recently it came out a Linux distribution that supports the I2s bus and works very well
http://www.diyaudio.com/forums/p ... -4.html#post4614528
I tried adding modules to OpenELEC but not know how to do

jernej · Published in 2016-2-20 22:51:28

If driver is already included in kernel, you can enable it in linux.arm.conf at projects/H3/linux. If it's not, then you must prepare a patch to add it to kernel (projects/H3/patches/linux) and edit linux.arm.conf. Third option is to do something like wireless drivers (packages/linux-drivers/)

melanrz · Published in 2016-2-22 05:41:40

chaszim replied at 2016-2-17 12:02
The Realtek Semiconductor Corp's. RTL2832U was very popular with it's $10 price tag, it had 2 chip s ...

driver is there but system not load ,with modprobe doesn't work too

chaszim · Published in 2016-2-22 08:08:21

Edited by chaszim at 2016-2-22 08:09

My two new latest favorite pages to follow. So much less frustrating, even though they weren't created till 2/2 & 2/3.
Latest Image Release:
http://www.orangepi.org/orangepi ... 1077&extra=page%3D1
& FAQ Page:
http://www.orangepi.org/orangepi ... 1075&extra=page%3D1
which also leads to gethub.

chaszim · Published in 2016-2-22 08:11:41

Edited by chaszim at 2016-2-22 08:34

Is there any reason not listed on the FAQ page why image 78757 is not running on the HDMI output, and what is the fix?I tried swapping the 1080p script.bin file in, then subbed in the 720p script.
it's nice to see that the "Red" led is running again.