(SOLVED) Enable sata 看全部

Edited by Galeots at 2016-2-26 03:47

I found that they disabled the sata because they are too slow, give me a hand to enable it ?!
by script.bin not work because missing diver.
I can not figure it out!
Use orange pi plus 2 of OpenELEC
anybody with my problem?
  • Sofa jernej
  • 2016-2-12 02:09:59
I can speak only for PLUS version (not "PLUS 2"), but I suppose it is the same. Please check if it is.

On OrangePi PLUS there is no need for any special driver, because it uses GL830 (USB to SATA). Oh manufacturer site the following is stated:
quote: Complies with USB Storage Class specification ver.1.0. (Bulk only protocol)


If ordinary USB Flash dongle is working, then also SATA port should work.

Can you check markings on SATA chip (the only chip on the bottom)?
quote: jernej replied at 2016-2-12 02:09
I can speak only for PLUS version (not "LUS 2"), but I suppose it is the same. Please check if it i ...

Thank you for answering!
use the GL830 but it seems that not all drivers loads!
I added to this script.bin shorthanded!
However after enabling not delivering the 5 volts for even sata!
[Sata_para]
sata_used = 1
sata_power_en = portB08<1><default><default><0>
  • Floor jernej
  • 2016-2-12 03:23:48
Can you find a schematics for PLUS 2?
quote: jernej replied at 2016-2-12 03:23
Can you find a schematics for PLUS 2?

Yes!
you use kodi of plus !?
then you work sata hdd !?
I have to assemble me hand hdd

attachment: 您需要登录才可以下载或查看附件。没有账号?Register
1234.. 7NextPage