Is it possible in any way adding the 2nd ethernet interface to the OPI boards?
I was figuring out on how to replace my PC running router and other server applications with the OPI board.
The lack of the 2nd ethX is quite a constraint for that kind of use.

Edited by rodolfo at 2016-5-9 07:37

Use a USB3 GLAN adapter to get up to 300mbps on the USB 2.0 ports. Enjoy.

Thnks. I thought about USB-LAN adapter. The cost is abt 7 USD on top. Probably for this new project it is worth buying a new SCB with 2 eth interfaces.

Edited by dx.l at 2016-5-20 11:54

Hello.
What about this variant?
aliexpress.com/item/2016-High-Speed-USB-PC-To-PC-Online-Share-Sync-Link-Net-Direct-Data-File-Transfer/32614567354.html
or this
aliexpress.com/item/USB-PC-to-PC-Direct-Link-Network-LAN-Cable-Data-File-Transfer-Wire/32449215420.html
and this
aliexpress.com/item/USB-2-0-Network-Lan-PC-TO-PC-Link-Data-Transfer-Wire-CABLE-Netlink-For-Laptop/2051019744.html

Anyone had used it?

Some doc's are here.
http://www.linux-usb.org/usbnet/

This is still an expensive solution and probably too much of a hassle for regular use.
It can meet only specific cases.