please choosego to mobile | Continue to access the PC version
View: 4772|Reply: 2

PA00 (pin13) can't be used as GPIO!!!

[Copy link]

3

threads

10

posts

111

credits

Registered member

Rank: 2

credits
111
Published in 2016-7-8 06:28:09 | Show all floors |Read mode
Hi there!

I've (another) weird issue, I can't use the GPIO27 (pin 13 / PA00) pin as GPIO...
in my fex file it's commented in any other possible usage (uart and jtag), thus the only one is in gpio_para

[gpio_para]
gpio_used        = 1
gpio_num         = 4
gpio_pin_1 = portL10<1><default><default><1>
gpio_pin_2 = portA15<1><default><default><0>
gpio_pin_3 = portA00<1><default><default><0>
gpio_pin_4 = portA03<1><default><default><0>

[led_assign]
normal_led      = "gpio_pin_2"
standby_led     = "gpio_pin_1"


Listed is not available
ls /sys/class/gpio_sw/
normal_led  PA15  PA3  PL10  standby_led

Any advice?

Thanks!



10

threads

218

posts

2040

credits

Gold member

Rank: 6Rank: 6

credits
2040
Published in 2016-7-8 20:07:41 | Show all floors
Information is too little.
Please show me your hardware model and used OS image.

3

threads

10

posts

111

credits

Registered member

Rank: 2

credits
111
 Author| Published in 2016-7-9 01:45:04 | Show all floors
Sorry; hardware is based on 2x orange pi plus2, debian jessie minimal and fedora minimal (both from loboris) with the same problem other ports could be used as GPIO with no problems.
Thanks in advance
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list