Build the image using buildroot for orange pi PC . ethernet is not working my etc/network/interfaces looks as below
auto eth0iface eth0 inet dhcpi am using buildroot
Hi, you could check the image you use, which should be download from http://www.orangepi.org/downloadresources/
And it still cannot work, try to re-write the image.
And check the power supply you use. Hope you could solve your problem.
There are a few things that you can check if your OPI Ethernet is not working. First, make sure that your Ethernet cable is plugged in properly and that your OPI is connected to the same network as your computer. Tax Law If that doesn't work, you can try resetting your OPI or reconfiguring your network settings.
Show IP Card
Radar Card
Published in 2016-8-13 11:47:25
Bump Card
Stick Card
Silent card
Open Thread Card
Highlighter card
Jack
Anonimous Post
Published in 2016-9-3 14:28:49