please choosego to mobile | Continue to access the PC version
View: 17535|Reply: 5

Motion not working on Orange Pi One ( with IP camera + Armbian Image + Motion)

[Copy link]

1

threads

2

posts

19

credits

Novice

Rank: 1

credits
19
Published in 2016-9-12 17:35:26 | Show all floors |Read mode
I am using OrangePi One with small 6$ orange Pi camera (PC /Pi One/PC Plus/Plus2e Camera with wide-angle lens for Orange Pi)
Refer for camera details: https://www.aliexpress.com/store/product/Orange-Pi-Open-source-IP-Camera-with-wide-angle-lens-Smart-Home-Control-Device-for-PC/1553371_32652476606.html

Here are the stes I am doing


1. Download image Armbian_5.14_Orangefromhttp://www.armbian.com/orange-pi-one/pione_Ubuntu_xenial_3.4.112 and get ready with SD card image.

2. Installed motion sudo apt-get install motion
3. Installed cheese sudo apt-get install chees
4. Modified the motion.config file to turnoff localhost
stream_localhost off
changed the port to 8085
5.
sudo modprobe gc2035
sudo modprobe vfe_v4l2

6. sudo motion to start the motion



After all this when I type myIPAddress::8085 it says:
Unable to open video device
Error capturing first image


I see above two error messages alternatively.

Please share how to fix above issue.

Thanks and Regards,
Manish Kakra

7

threads

20

posts

138

credits

Registered member

Rank: 2

credits
138
Published in 2016-9-12 23:19:58 | Show all floors
I had used motioneye on my orange pi one .
if you want Ipcamera with web panel and full control it over internet or ip use bellow  instructions :

https://github.com/ccrisan/motioneye/wiki/Install-On-Raspbian

my problem in this motioneye is that armbian lite does not have my webcam driver.
In armbian desktop every thing is fine.

if you have any question about motioneye Reply this post.

1

threads

2

posts

19

credits

Novice

Rank: 1

credits
19
 Author| Published in 2016-9-14 11:09:42 | Show all floors
soroush_crazy replied at 2016-9-12 23:19
I had used motioneye on my orange pi one .
if you want Ipcamera with web panel and full control it o ...

Thanks soroush_crazy for helping.
I will try the instructions that you suggested.

Just wanted to know if there is any way to use this IP camera with armbian lite. for example if there is any way to add the required drivers to it ?
I am okay evan if there are few additional steps to make it work with armbian lite.

Plesae let me know what you think. Appriciate your help.

Thanks,
Manish K

9

threads

634

posts

4398

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
4398
Published in 2016-9-14 13:35:24 | Show all floors
Check this:

http://forum.armbian.com/index.p ... s-camera/?hl=camera
And do more search with keyword "camera" on armbian forum.

7

threads

20

posts

138

credits

Registered member

Rank: 2

credits
138
Published in 2016-9-15 03:06:02 | Show all floors
MANISHKAKRA replied at 2016-9-14 11:09
Thanks soroush_crazy for helping.
I will try the instructions that you suggested.

about 95% of camera will work with Armbian drivers.I hope you will have no problem with that.
the motioneye user name is : "admin" wihout any password , you can use your own password for it.
if you wnat to change motion eye port form 8765 to 80 edit /etc/motioneye/motioneye.conf with command "sudo nano /etc/motioneye/motioneye.conf" and find port change it form 8765 to 80 , and save it (use CTRL + x and Y Enter) then restart motion eye by command "systemctl restart motioneye" or reboot OPI.
POINT : just connect webcame befor booting armbian (after installing motioneye).




0

threads

6

posts

46

credits

Novice

Rank: 1

credits
46
Published in 2017-11-30 18:09:16 | Show all floors
There are some troubleshoots to solve your problem:

                Make sure you have enabled motion detection or Reconfigure

                Updating security camera firmware or firmware of IP camera to the latest version could fix
                potential bugs that have been meddling with the motion detection.

                Update Monitoring Software or apps. It's play a role in motion capture and motion alert triggers
                since you need them to enable motion detection and trigger in the first place, or not for some of
                them trigger motion by default.

                Change Cameras Placement or Pointing Angle.

Hope this will help you.
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list