Forum > Beginners
paa123456 看全部
2016-9-29 09:51:12

I have just got an 'orange pi pc' board and am trying to make it work.

I did download and put on a SD card using 'etcher' tool under windows the following images -

None of the images would show anything on the display. The board has a red light which is on, and yellow light from the ethernet con. - blinks and then is off.

My power supply is 5v/2a , I can try to find a power supply with 2.5a or more current - as recommended.
The sd card is 8gb and new.

What could be the problem?
Do the above images need more setup after 'etcher' is done writing/verifying?
Which image can you recommend which has all included after 'etcher' is done writing/verifying?

Thank you ,

tinjaw 看全部
2016-11-19 10:10:18
It turns out the transflash cards that I was using were the problem. I got some new ones and now things appear to be working properly.
admin 看全部
2016-9-29 10:00:05
Hi friend, try at this tool to make image. Is your SD card class 10?

attachment: 您需要登录才可以下载或查看附件。没有账号?Register
paa123456 看全部
2016-10-1 04:17:12
I did purchased several sd cards and the manufacturers claim the cards are class 10 .
I did download the 'phoenixcard' tool.

When I did try to put these images on a sd card -
the phoenixcard tool says- 'script not found; please use new version image'

What is the problem?
Which image can I use for 'orange pi pc' board?

Thanks, Paul.
igorpec 看全部
2016-10-1 12:59:03
paa123456 看全部
2016-10-2 02:44:00
Hi ,
I did download and unpacked this image - Armbian_5.20_Orangepipc_Debian_jessie_3.4.112_desktop.7z ;

The 'phoneixcard' tool still says -  'script not found; please use new version image'

I did use also 'etcher' tool to put the image on 2 separate sd cards.
Both cards could not boot - nothing shown on display.
What do I do to boot on my board?

At this point I think the orange-pi-pc board that I got is defective or malfunctioning.
What can I do in this case?

Thanks, Paul.

OrangePi En

Powered by Discuz! X3.4

homepage|Simple edition|Touch edition|PC