login|Register
Forum > Device drivers(GPU&VPU)
Post|
看11988|回4|Favorite
dekip 看全部
2017-2-24 05:47:29
What display would you recommend for this board? Some from 3.2 - 5 inches?

There are some tutorials for h2/3 but not for h5. Thaks in advance.

marm496 看全部
2017-5-31 07:30:12
well I am using this one from aliexpress: EYEWINK Raspberry Pi 3 Display HDMI 7 Inch 1024X600 LCD with Touch Screen Monitor for Raspberry Pi 3 B+/2B Pcduino Banana P, its 7 inches not smaller but working really well, this one is similar to mine but it's 5 inches: https://es.aliexpress.com/store/ ... 12010612.0.0.B4VFEw
dekip 看全部
2017-8-30 00:29:42
Edited by dekip at 2017-8-30 00:31

Get this display from Aliexpres. It is 5" with hdmi connector. It works as a screen, and that is ok. But how to set touchscreen to works?
Display: https://www.aliexpress.com/item/ ... Pi/32329913242.html
OS: Armbian
SD card: Samsung evo+ class 10 32GB
OPi PC2

Solution for some other OS would do the job.
manfire 看全部
2017-9-8 17:27:46
mousavy_mh 看全部
2017-9-10 22:39:58
Edited by mousavy_mh at 2017-9-10 22:41

I have a 5" resistive touch screen from waveshare.
It works fine when I connect it to other hdmi display
But it doesn't show any picture when I connect it to PC2
any suggestion?
PS: it works fine with armbian image. but none of orange pi works with it

OrangePi En

Powered by Discuz! X3.4

homepage|Simple edition|Touch edition|PC