Accidentally connected PI PC to 12V

Nareg · Post time 2017-2-27 03:51:27

Edited by Nareg at 2017-2-27 08:01

Hi!

I had accidentally connected Orange PI PC to 12V power supply. Now no LEDs are on even when I use my 5V power supply. What should I check? What do I need to test?

Thank You

ForKicks · Post time 2017-3-23 00:25:48

I think its safe to say that it is fried I'm afraid. Not much you can do at this point

edu_viccini · Post time 2017-3-23 06:07:58

How much time you connect the 12V power? if you leave a while, have a chance to work... but, if you put the 12v power and leave it... you lost your board...

liderbug · Post time 2019-6-27 10:39:40

I just did the same thing. Disconnected a running PC2, set things down, did some moving, picked up the PC2 and the yellow tipped PS and couldn't figure out why it didn't run. Who was the IDIOT the made the same plug for 5 volts or is it 12 volts. Every voltage has it's own size plug - unless it's a Orange Pi