Orange Pi Plus Dc Input & Output

ivanelbigfoot · Published in 2015-5-21 18:22:25

Hello Everyone.
What is the size of the connector input & output current Orange Pi Plus?
I want to make an extension cable and not the size of the female or male connectors.

fritz · Published in 2015-5-22 15:54:54

https://linux-sunxi.org/Xunlong_Orange_Pi_Plus
I have updated it

fritz · Published in 2015-5-22 15:24:06

I measured 3.9 mm, therefore, I think it's a 4mm barrel plug.

FCHU · Published in 2015-5-22 15:37:02

Hello, about the DC connexion, is the postive plot is inside, or outside ? Is it +5v -(o- gnd or gnd -(o- +5v ?

ivanelbigfoot · Published in 2015-5-22 15:40:31

Can anyone teach me the link to the correct connector ?

fritz · Published in 2015-5-22 16:00:32

Edited by fritz at 2015-5-22 09:02

Forgot to say, when you buy a board, it comes with usb to barrel conector cable.
But i would reccomend to buy a proper 5v / 2A power supply for this boards.

cmgilley · Published in 2015-6-5 20:37:12

(+5v inside of connector) & (-0 gnd outside of connector)

AlvaTron · Published in 2015-6-23 17:50:54

Hello everyone,

How many amps is recommended that either the power supply?

I'll connect the charger of may Nexus 5, that is 5V and 1.2A,
and the Orange pi Plus sometimes works and sometimes not.

It may not be enough?

Regards!

matteobp · Published in 2015-6-23 18:36:09

Extracted from this page https://linux-sunxi.org/Xunlong_Orange_Pi_Plus

Power DC 5V @ 2A (4.0mm/1.7mm barrel plug - centre positive)

I think 1.2A is not enough. I bough the kit Orange PI Plus + power supply, and I received a 3A power supply.