Please select To the mobile version | Continue to access the desktop computer version


Hot search: orangepi
View: 7095|Reply: 0

Updated Kali Linux

[Copy link]







Registered member

Rank: 2

Post time 2017-5-31 23:33:03 | Show all posts |Read mode
Edited by BryanFRitt at 2017-6-3 04:03

The Kali Linux version that's available here[Sana] is an older version of Kali that has been EOL'd since the 15th of April 2016. *
Any chance of a newer version(of anything) being able to be download from here for the Orange Pi Plus? [current Kali version as of this post is the Kali Linux 2017.1 rolling release]
*"Please note that the Kali sana repositories will no longer be updated and will be EOL’d on the 15th of April 2016."


I've tried upgrading from the version available here, but that has some issues.

"Transitioning From Kali 2.0 to Kali Rolling"

Something with /etc/inetd.conf
  1. An unrecognized entry for tftp was found in /etc/inetd.conf while trying to add the following entry:

  2. tftp dgram udp wait nobody /usr/sbin/tcpd /usr/sbin/in.tftpd --tftpd-timeout 300 --retry-timeout 5 --mcast-port 1758 --mcast-addr --mcast-ttl 1 --maxthread 100 --verbose=7 /srv/tftp

  3. The unrecognized entry is:

  4. tftp dgram udp4 wait nobody /usr/sbin/tcpd /usr/sbin/in.tftpd --tftpd-timeout 300 --retry-timeout 5 --mcast-port 1758 --mcast-addr --mcast-ttl 1 --maxthread 100 --verbose=5 /srv/tftp
Copy the Code

after updating `sudo install_to_emmc btrfs` errors [note used #!/bin/bash -x to see it like this]
  1. + echo 'Mounting EMMC partitions...'
  2. Mounting EMMC partitions...
  3. + mount /dev/mmcblk1p1 /tmp/_fatdir
  4. + mount -o compress-force=lzo /dev/mmcblk1p2 /tmp/_extdir
  5. mount: wrong fs type, bad option, bad superblock on /dev/mmcblk1p2,
  6.        missing codepage or helper program, or other error

  7.        In some cases useful info is found in syslog - try
  8.        dmesg | tail or so.
  9. + echo 'ERROR mounting linux partitions...'
  10. ERROR mounting linux partitions...
  11. + umount /tmp/_fatdir
  12. + exit 1
Copy the Code

`dmesg` shows a bunch messages showing up every second
  1. ADDRCONF(NETDEV_UP): wlan0: link is not ready
  2. ADDRCONF(NETDEV_UP): wlan1: link is not ready
  3. hw_var_set_bssid   reg=618
Copy the Code

You have to log in before you can reply Login | Register

Points Rules

Archiver|Mobile edition|Darkroom|OrangePi En ( 粤ICP备14086627号-2

2020-8-13 18:41 GMT+8 , Processed in 0.028793 second(s), 23 queries .

Powered by Discuz! X3.2

© 2014-2015 orangepibbs en.

Quick Reply To Top Return to the list