Hi,


I've got an H5 Zero2 and wanting to get the camera running on a linux image.

Anyone know if any of the standard images will run this out of the box?

Or if there is a known path to success?

Or what problems exist and how I can contribute to get it running?

So far, I've tried loading a couple of images, followed by



I do not see any messages from dmesg after this. I expect to see similar output to on OPi1 saing the camera is connected and the driver is loaded.

I'm fairly familiar with the kernel driver code and have already made downstream changes to gc2035.ko and vfe_v4l2.ko for the OPi1 to get round the annoying ffmeg error.. I haven't upstreamed it because it might break other cameras, I stopped digging and testing when it worked for my project. I am happy to help with whatever contribution is required to get this working?

The steps you took are correct and you should see the driver messages as you see in Opi1.
This image is under stress test as shown here: https://youtu.be/LndfhkKW2CY tpo see how it performs.

Thanks Lex.

I've made progress running Debian 8 image, and the chip is recognised and correct messages (+ debug) in dmesg and uart output. I've tried to build a complete image from sunxi source but none of the flashed images appear to produce a working sd card. Invariably the message on boot is that it can't recognise the file system and reverts to emmc load.

I haven't managed to get HDMI working with my DVI monitor, but this isn't entirely a limitation at the moment, since i'm working on a server project.

However, the wifi is constantly dropping out, so even keeping the dist up to date is painful.

Is there an update package for wifi, I can get before any other update?

Console error is: