login|Register
Forum > General discussion
Post|
看3491|回0|Favorite
malvcr 看全部
2017-10-2 23:31:15
I have been trying to work with the Zero Plus 2 - H5 model, but I need three USB ports.

When I attach the NAS expansion to the 13 pin header I obtain two very well behaved USB ports (I will use one as the SATA device from the NAS).  Then, the third one could be the microUSB native card port.

However, there is no way for the ZP2H5 to recognize whatever I can connect there.


Trying to check, I included an OTG cable with an USB Safety Tester (these small boxes with an LCD describing consumption and other data).  But the box shows nothing ... asi if there is no connection at all.

I am using the experimental ARMBIAN distribution from their web site.  However, I don't know if this is a characteristic with the hardware by itself.  My questions are:

OrangePi En

Powered by Discuz! X3.4

homepage|Simple edition|Touch edition|PC