login|Register
Forum > Beginners
Post|
看11030|回7|Favorite
aravinthkumarj1 看全部
2018-2-6 14:56:00
Hi All,
Using phoenix card v3.1.0 (tried 3.0.9 also) I'm flashing the android image. It's getting below error.
.
[bootloader] Burn Success
Error

Can you help me to fix this issue.


Regards,
Aravinth

less 看全部
2018-3-12 07:09:36
this happens to you while writing the android image to the microSD card using Phoenix, correct?

If so, I experienced same problem - Phoenix returned an error at various stages during the write process - tried number of cards and readers.
Somehow I realized the problem was with the combination of laptop, OS and cards/adapter I am using and Phoenix.

This was happening regardless of which Android image(s) I tried to write onto an SD card.

Out of frustration, I tried retry the write process one after another (aka brute force) until once I got successful write, the Android image booted up successfully. I was trying to flash the h3droid image by the way.

Later on tried with another laptop and all worked like charm on a first attempt.

Anyway, this phoenix thing does not sound like a best piece of a reliable software.
igorpec 看全部
2018-2-7 04:29:42
Check this Android: https://h3droid.com/
aravinthkumarj1 看全部
2018-2-7 13:12:56

quote:

igorpec replied at 2018-2-7 04:29
Check this Android: https://h3droid.com/

I'm using Orange Pi Zero board. Is this will support for this board?

Regards,
Aravinth

aravinthkumarj1 看全部
2018-2-9 15:32:44

quote:

8bitbacon replied at 2018-2-7 21:13
If your pi zero is the one with the 8gb mmc you have to boot to the android without an sd card, phoe ...

Is there any boot mode settings to switch between sd to emmc.?

Regards,
Aravinth

kotcza 看全部
2018-3-12 03:27:15
if orange pi zero is the one without hdmi port, then you might need fel-installer: http://www.orangepi.org/orangepi ... 5&highlight=fel
12NextPage

OrangePi En

Powered by Discuz! X3.4

homepage|Simple edition|Touch edition|PC