Linux Distributions for Orange PI H3 boards - Debian - OrangePi - mobile

Linux Distributions for Orange PI H3 boards

看1274921|回1240|Favorite

loboris 看全部
2015-6-17 03:16:05

Edited by loboris at 2015-11-9 16:12

You are welcome to try
Debian, Ubuntu, Fedora 22, Kali Linux, Arch Linux, OpenSuse, Gentoo, and Slackware
images for OrangePI H3 boards,

You can also build your own image using build scripts (see bottom of the post).

Download from Mega or Google Drive
Last update: 11/09/2015 14:10 UTC
Last kernel update (scriptbin_kernel.tar.gz): 10/17/2015 13:30 UTC
Last install (desktop & emmc) scripts update (desktop_scripts.tar.gz): 09/02/2015 17:45 UTC

Review of the OPI boards with Debian Jessie XFCE image on CNXSoft (updated with video).
And more about OPI camera and GPIO.

Available images:

<distro_rel>_mini.img basic Debian and Ubuntu images, base for server or desktop, many usefull console programs installed (mc, htop, tmux, ...)
OrangePI_Ubuntu_Vivid_Mate.img Ubuntu 15.04 with Mate Desktop
OrangePI_Lubuntu_Vivid.img Lubuntu 15.04 with LXDE/Lubuntu Desktop
OrangePI_Jessie_Xfce.img Debian 8 with XFCE Desktop
OrangePI-PC_Ubuntu_Vivid_Mate.img prepared for OrangePI users, just copy to SDCard, no configuration needed !
Fedora22_Minimal.img Fedora 22 minimal image (without Desktop)
Fedora22_Mate.img Fedora 22 full Mate Desktop
Fedora22_LXDE.img Fedora 22 LXDE Desktop
Kali_2.0-Xfce.img Kali Linux 2.0 with full XFCE Desktop
ArchLinux_Minimal.img Arch Linux basic image (without Desktop GUI)
OpenSUSE_Tumbleweed_JeOS.img OpenSuse JeOS minimal image (without Desktop GUI)
OpenSUSE_Tumbleweed_XFCE.img OpenSuse with full XFCE Desktop
Gentoo_full_cli.img Gento Linux, configured (network, ssh, ntp, gentoolkit, tmux, mc, btrfs-progs installed)
OPI_slackware_14.1.img Slackware Arm 14.1 minimal image (without Desktop GUI)

! user name orangepi, password for user and root orangepi !

All images are ready to be installed on any Orange Pi H3 board, tested on Orange PI 2, Orange PI PLUS, Orange PI PLUS2, Orange PI PC.

In case of any problem, please first check if you have the latest kernel, desktop scripts, etc.

Installation on SD Card

Download any of the available images (xz archive) from Mega or GoogleDrive
Download scriptbin_kernel.tar.gz, it contains the latest kernel (uImage) and script.bin
Unpack the archive.
Write the xxx.img file (disk image) to your SD Card
on Linux use dd command ( sudo dd if=image_name.img of=/dev/sdX bs=1M oflag=direct )
on Windows use disk image writing software such as Win32 Disk Imager
After writing the image, mount SD Card FAT partition (BOOT)
Copy uImage_OPI-2 or uImage_OPI-PLUS (depending on your board type) to uImage (for OPI-PC use uImage_OPI-2)
Copy one of the script.bin.OPI-XXXX (depending on your board type and desired monitor resolution) to script.bin
use uImage_OPI-XX and script.bin.OPI-XXXX from scriptbin_kernel.tar.gz if it is newer (probably it is).
Boot your Orange PI board from SD Card
After booting resize Linux partition to fit your SD Card size:
code:
1. sudo fs_resize
Reboot

You can find the more detailed instructions for begginers here (thanks @Thumos)

Installation on internal EMMC

Install the image on SD Card as described above
Boot your Orange PI board from SD Card
Run:
code:
1. sudo install_to_emmc
Power off the board.
Remove SD Card
Power on, the board will boot from EMMC
You don't have to resize SD Card before installation on EMMC if you don't plan to use it.
You can use btrfs option to format your emmc Linux partition as btrfs, it will be mounted with compress=lzo option and you can save up to 40% of emmc size.
code:
1. sudo install_to_emmc btrfs

Backup internal EMMC to SD Card

Boot your Orange PI board from EMMC without SD Card inserted
login
insert your SD Card
Run:
code:
1. sudo install_to_sdcard [btrfs]
Your emmc Linux installation will be transfered to SD Card
You can boot from that SD Card on another or the same OPI board
If booting on different OPI board, remember to copy the kernel (uImage) and script.bin for that board

Booting from USB drive:

You can also boot from USB drive partition.
The file named cmdline.txt must exist on BOOT (fat) partition on sd card or emmc.

The content of that file must be: root=/dev/sdXn, where /dev/sdXn is the USB drive partition (as visible from OPI) to which to boot (for example root=/dev/sda1).
The line which mounts / in /etc/fstab on USB partition Linux must point to the right partition.
You can use install_to_usb script to install Linux oun USB drive partition and automaticaly create right cmdline.txt and fstab.
If cmdline.txt does not exist, or USB drive partition is not accesible (USB drive not attached), system boots to /dev/mmcblk0p1 (sdcard if inserted, otherwise emmc, if available)
Bootable SD Card or EMMC must be accesible when booting to USB, but it is not necessary that the second partition contains valid Linux fs, sd card can have only the 1st (fat) partition
You can have different Linux installations on different USB drive partitions, just edit the cmdline.txt to select to which to boot.
The latest uImage must be used.

Using install_to_usb script:

Use install_to_usb script to install Linux to USB drive partition. Can be used to backup your SDCard/EMMC installation.
code:
1. sudo install_to_usb /dev/sdXn [btrfs]|[noformat]
/dev/sdXn is the USB drive partition to which to install (for example /dev/sda1)
if the second parameter is btrfs, USB partition will be formated as btrfs, otherwise as ext4
if the second parameter is noformat, USB partition will not be formated, content of the partition will be updated (in case you have used install_to_usb to backup your sdcard/emmc before)
be careful not to select the wrong USB partition, it will be erased/updated!
If the script does not exist on your image, download desktop_scripts.tar.gz, unpack to /usr/local/bin.
You must have the new uImage version, with boot to usb enabled.

If you are using an older image:

Download scriptbin_kernel.tar.gz from Mega, unpack.
Copy uImage_OPI-2 or uImage_OPI-PLUS (depending on your board type) to uImage on SD Card FAT partition
Copy one of the script.bin.OPI-XXXX (depending on your board type and desired monitor resolution) to script.bin on SD Card FAT partition
Copy lib/modules/3.4.39 directory to SD Card Linux partition (delete old first)
Copy all files (without lib directory) to /boot directory on linux partition in case you planing to install to emmc.
Backup your old kernel, script.bin and lib/modules/3.4.39 in case something goes wrong.

Features:

boot0_sdcard.fex, u-boot.fex and kernel (uImage) created from sources
kernel built with many features enabled (btrfs, USB serial adapters, bluetooth, hdmi sound, nfsd ...)
CPU runs at 1.53GHz, termal management adjusted so that all 4 cores are active up to 100 °C
GPIO, i2c (TWI), SPI enabled
Linux fs created from scratch with debootstrap
mimimal image can be the base for server or desktop
framebuffer console works
serial (uart) console works
ssh installed, root login ower ssh enabled
initial filesystem size less then 500 MB
initial RAM usage less then 50 MB
some usefull console programs installed (mc, htop, tmux, ...)
you can install server componnents (tested apache2, php, firebird, webmin, ...)
you can install full desktop, tested LXDE, XFCE and Mate desktop (recommended)
scripts to install lxde, xfce or mate desktop included, run (with lubuntu option the script will install Lubuntu core package, so you can get real Lubuntu look):

code:

sudo install_lxde_desktop [lubuntu]
sudo install_mate_desktop
sudo install_xfce_desktop

script to install x2go server (install only after desktop is installed), run

code:

sudo install_x2goserver

Notes

user name orangepi, pass for user and root orangepi
to enable wifi connection from command line run: sudo nmcli -a d wifi connect and enter your wifi credentials
to always run at full speed install heatsink and fan !
How to enable AP mode, see this post.

Building the system

You can try to build Debian/Ubuntu for OrangePI yourself.

Clone my GitHub repository.
You will need running Ubuntu or Debian system (you can even run it on OrangePI).
Before running the script install debootstrap and qemu-user-static packages.
Read carefully and edit params.sh to adjust the parameters to your needs.
Run sudo create_image to create Ubuntu system. I recommend to build to local directory, then you can run image_from_dir to transfer the system to sd card or image.

GitHub

Kernel sources and Ubuntu/Debian building scripts are available on github.

OrangePi kernel sources
Ubuntu/Debian building scripts

If you find my work usefull, you can DONATE

loboris 看全部
2015-9-13 19:13:48

Edited by loboris at 2015-9-13 12:46

Tested AP mode, works good using create_ap method.

Before using, install some packages:

code:

sudo apt-get install git iptables dnsmasq util-linux procps hostapd iproute2 iw haveged

If you don't want to install git, just download create_ap-master.zip from git or my Mega or GoogleDrive and unpack.

Then run

code:

git clone https://github.com/oblique/create_ap
cd create_ap
sudo make install

After that you can use

code:

sudo create_ap --ieee80211n --ht_capab '[HT40+]' wlan0 eth0 MyAccessPoint MyPassPhrase &

to start AP

See Examples on git page about how to start AP on boot.

Tested on OPI-PLUS, Ubuntu image, connecting from Android and Windows 10.

sauberpauli 看全部
2015-10-9 23:18:59

@loboris:
1 wire support is amazing!

tested with 18DS20 TempSensor

[  84.108968] Driver for 1-wire Dallas network protocol.
[ 90.052218] W1_SUNXI: Added w1-gpio on GPIO-20
[  114.093276] W1_GPIO: added w1 master on GPIO20
[  114.126649] w1_master_driver w1_bus_master1: Family 28 for 28.021502f97fff.48

root@OrangePI:/sys/bus/w1/devices/28-021502f97fff# cat w1_slave
41 01 55 00 7f ff 0c 10 c2 : crc=c2 YES
41 01 55 00 7f ff 0c 10 c2 t=20062

very good AAA+++

loboris 看全部
2015-10-4 19:01:56

Edited by loboris at 2015-10-4 21:12

KERNEL UPDATE (EXPERIMENTAL)
Uploaded scriptbin_kernel_test.tar.gz which contains the kernel with some new features:
mali kernel drivers (ump,mali,drm,mali_drm), 1wire, CH341 USB->Serial, cdc-acm, 800x480 support (uncomplete) ...

The kernel is not fully tested yet, please backup your old files/directories before upgrading.

To upgrade:

download scriptbin_kernel_test.tar.gz from Mega or GoogleDrive, unpack
copy uImage and script.bin for your board type to the fat partition
delete the old /lib/modules/3.4.39 directory
copy lib directory from the archive to the linux partition
run: sudo depmod -a
reboot

loboris 看全部
2015-10-8 23:54:31

quote:
Sitheek replied at 2015-10-8 08:54
Yes that is true. But i think such cheap boards like Orange Pi2 or Radxa Rock Lite suffer from poor ...

All my work is for free (well, I've got OPI-PC and OPI-PLUS for testing...)
I'm in absolutely no way related to the OrangePI manufacturer.
I agree with you that the manufactorer does not have the money to invest in software development, if they sell OPI-PC for 15 US$ I can't imagine how they can have any profit at all.

loboris 看全部
2015-10-25 23:48:32

@birky @toxuin @ALL you can try new kernel version with included dvb, v4l drivers and CONFIG_BRIDGE=m

You can use the new kernel update script:

Download update_kernel.sh from Mega or GoogleDrive
Copy the script to /usr/local/bin and make it executable

code:

sudo cp <download_path>/update_kernel.sh /usr/local/bin
sudo chmod +x /usr/local/bin/update_kernel.sh

Run the script.

code:

sudo update_kernel.sh

loboris 看全部
2015-10-10 20:35:33

INFO

Kernel sources and Ubuntu/Debian building scripts are now available on github.

OrangePi kernel sources
Ubuntu/Debian building scripts

loboris 看全部
2015-9-18 05:46:31

Complete kernel sources, configs, and build scripts I'm using are uploaded to Mega. (kernel_3.4.9.tar.xz)

fritz 看全部
2015-6-17 15:05:07

Yeah!
That's how it should work.
Community makes the software, delivers patches, gives the support, makes drinks and offers free beer.
Xunlong and Allwinner makes the money.

This will maybe work if at least:
1. There would be complete and updated H3 documentation.
2. Updated SDK with all sources and patches available.
3. officialy released sources and patches GPL licensed so that we can use it.
4......
But that's only a dream this will never happen.

@loboris
Compliment, at least one that can publish a working debian image for opi2
Xunlong seems not able to do it.

LucasMFortal 看全部
2017-2-9 23:47:47

I've tried some of those images on my OPI Plus 2E but none of them was compatible with wifi neither ethernet of my board... How can i install those drivers? (also, without no connection i cant get build-essential package to make drivers)

igorpec 看全部
2016-9-1 15:16:22

That's usually nothing critical. You are trying to load a module (from /etc/modules) which does not exists.

zhao_steven 看全部
2015-6-17 06:41:51

@loboris Thank you very much.

derrickyee81 看全部
2015-6-17 13:49:21

@lobois,

Thanks. Downloading now to try.

Cheers

rupertgti 看全部
2015-6-17 13:52:43

Thanks loboris!!

12 3 4 .. 249 / 249 pagesNextPage