Linux Distributions for Orange PI H3 boards

egorv · Published in 2016-1-17 04:49:37

Edited by egorv at 2016-1-19 01:14

Hi!
How to connect 3G/LTE Modem Huawei E3372 in Orange pi pc?
I have not found the driver.
OS: OrangePI-PC_Ubuntu_Vivid_Mate.

*********************
I installed fedora.
Problem solved.

jeevasv · Published in 2016-1-20 10:07:57

Hi Loboris,

Do you mind adding the Kernel firmware loader patch to the kernel and updating the kernel packages so that all firmware dependent drivers works in distros with updated systemd whenever you have some time.

Please see http://www.orangepi.org/orangepi ... &extra=page%3D1

wizard2015 · Published in 2016-1-20 21:41:06

barban replied at 2015-11-29 08:21
The simplest solution to solve overscan issue when using orangepi's hdmi output is by actin on you ...

Thank you. It's a generally positive infromation. Hoping at some moment we will have OPI1+ & OPI2 completely supported and having up-to-date Linux images with newest mainline u-boot.... overscan_x and overscan_y woruld be very nice, in the case when TV does not allow to manipulate it so much as required.

sgdailey · Published in 2016-1-22 12:00:40

I am running the minimal jesse image from Loboris' but I need netfilter kernel support. Can anyone point me in the right direction to build kernel modules so that I dont have to rebuild the kernel completely?

Thanks

WereCatf · Published in 2016-1-26 04:59:48

I'm confused. I was planning on trying out the Ubuntu Mate - image for OPi PC once my board arrives in the mail, but I saw someone saying something about these images not having working GPU - acceleration or VDPAU - support?

jneves · Published in 2016-1-29 03:21:15

Hi, guys,

I'm a ordinary user. Started with a Raspberry pi 2 which I use for audio with Moode Audio. It's excellent, much better than a MacBook white with Audirvana, which I used to use for the same function.

Now, replacing the old notebook which I use for internet access, I've just received an Orange Pi Plus. It has Lobris´s Lubuntu image and I've been trying to know if I can use an app (Hippo Lite) in my smartphone (iphone) as keyboard/mouse.

Could you please let me know?

Thanks a lot,

João

tomekkup · Published in 2016-1-29 18:34:37

I see error "btusb: disagrees about version of symbol module_layout" while trying to boot my OPI 2 with usb bluetooth dongle. Of course this dongle is not recognized by os.

riodda · Published in 2016-2-1 22:23:26

How many UART are enabled ?

lukish · Published in 2016-2-1 23:45:23

riodda replied at 2016-2-1 22:23
How many UART are enabled ?

Three UART

scargill · Published in 2016-2-3 16:12:29

I have Debian Jessie, fully updated using the latest scripts. The Orange Pi PC generally works - however, despite adding in the Wiring Pi from here.... https://github.com/zhaolei/WiringOP - which compiled just fine, in Node-Red - the serial ports don't work... and even with the WIRING PI examples - I'm getting nowhere.

So serial ports..

serial port /dev/ttyS0 error: Error: Cannot open /dev/ttyS0

I get that for all 3 serial ports...

and Wiring Pi examples.. A simple BLINK example...

Error: setup: arguments['mode'] => ("undefined" in ("wpi", "gpio", "sys", "phys")) === false

Any idea how to progress from here?