Linux Distributions for Orange PI H3 boards

SkyyyNet · Published in 2015-11-17 00:20:49

Thanks for your work loboris. Is there any guidance for setting custom resolution such as 1680x1050 on the Ubuntu Mate image?

Npeti · Published in 2015-11-17 01:12:23

melanrz replied at 2015-11-16 16:12
Burn image and only rename right script and uimage,dont copy and replace from kernel.zip.

I tried that, too.

keiser1080 · Published in 2015-11-17 02:58:50

@whitewind

after runing depmod i have still the problem runing insmod or modprob.

[81659.709743] sunxi_ir_rx: disagrees about version of symbol module_layout
[81755.018185] sunxi_ir_rx: disagrees about version of symbol module_layout
[82167.210518] sunxi_ir_rx: disagrees about version of symbol module_layout
[85497.681178] sunxi_ir_rx: disagrees about version of symbol module_layout
[85757.569660] gpio_sunxi: disagrees about version of symbol module_layout
[85784.354381] gpio_sunxi: disagrees about version of symbol module_layout
[85886.982468] gpio_sunxi: disagrees about version of symbol module_layout
[85923.910757] gpio_sunxi: disagrees about version of symbol module_layout
[86079.776764] gpio_sunxi: disagrees about version of symbol module_layout
[86547.808618] gpio_sunxi: disagrees about version of symbol module_layout
[86555.651240] gpio_sunxi: disagrees about version of symbol module_layout

Copy code

sems to be a problem between the kernel version 3.4.39.7 and all the module.

modinfo btusb
filename: /lib/modules/3.4.39/kernel/drivers/bluetooth/btusb.ko
license: GPL
version: 0.6
description: Generic Bluetooth USB driver ver 0.6
author: Marcel Holtmann <<a href="mailto:marcel@holtmann.org">marcel@holtmann.org</a>>
srcversion: 1B7D3CD73BC2A9D79788897
alias: usb:v0A5Cp*d*dc*dsc*dp*icFFisc01ip01*
alias: usb:v0489pE033d*dc*dsc*dp*ic*isc*ip*
alias: usb:v413Cp8197d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0489pE042d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0C10p0000d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0BDBp1002d*dc*dsc*dp*ic*isc*ip*
alias: usb:v044Ep3002d*dc*dsc*dp*ic*isc*ip*
alias: usb:v044Ep3001d*dc*dsc*dp*ic*isc*ip*
alias: usb:v04BFp030Ad*dc*dsc*dp*ic*isc*ip*
alias: usb:v057Cp3800d*dc*dsc*dp*ic*isc*ip*
alias: usb:v05ACp8281d*dc*dsc*dp*ic*isc*ip*
alias: usb:v05ACp821Ad*dc*dsc*dp*ic*isc*ip*
alias: usb:v05ACp821Fd*dc*dsc*dp*ic*isc*ip*
alias: usb:v05ACp821Bd*dc*dsc*dp*ic*isc*ip*
alias: usb:v05ACp8218d*dc*dsc*dp*ic*isc*ip*
alias: usb:v05ACp8215d*dc*dsc*dp*ic*isc*ip*
alias: usb:v05ACp8213d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A5Cp21E1d*dc*dsc*dp*ic*isc*ip*
alias: usb:v05ACp*d*dc*dsc*dp*icFFisc01ip01*
alias: usb:v*p*d*dcE0dsc01dp01ic*isc*ip*
depends:
intree: Y
vermagic: 3.4.39 SMP preempt mod_unload modversions ARMv7 p2v8
parm: ignore_dga:Ignore devices with id 08fd:0001 (bool)
parm: ignore_csr:Ignore devices with id 0a12:0001 (bool)
parm: ignore_sniffer:Ignore devices with id 0a12:0002 (bool)
parm: disable_scofix:Disable fixup of wrong SCO buffer size (bool)
parm: force_scofix:Force fixup of wrong SCO buffers size (bool)
parm: reset:Send HCI reset command on initialization (bool)

Copy code

ThunderBRZ · Published in 2015-11-17 09:10:34

Hi every...

I try to compile asterisk on OPI PC, but i no have linux_headers to compile me ast11. Please any release a package to install

Linux OrangePI 3.4.39 #1 SMP PREEMPT Mon Oct 12 12:02:29 CEST 2015 armv7l GNU/Linux

whitewind · Published in 2015-11-17 13:54:35

keiser1080 replied at 2015-11-17 02:58
@whitewind

after runing depmod i have still the problem runing insmod or modprob.

Ensure that you use modules which are compiled for your kernel. Versions of uImage and /lib/modules/$(uname -r) must be the same

lymon · Published in 2015-11-17 14:04:27

Edited by lymon at 2015-11-17 14:13

jacer replied at 2015-11-16 21:16
I can use rtl8192cu only with WEP or None encryption, no WPA or WPA2. Mali installed on Debian Jessi ...

sounds like a problem with the wpa-supplicant package

is it installed ?

also this looks weird:

[ 20.286316] rtl8192cu: MAC address: xx:xe:xx:xb:x1:xx

and

[ 251.040176] wlan0: Creating new IBSS network, BSSID xx:xx:b2:xx:6a:xx

both are not valid mac-addresses
what is the actual mac-address of the wifi adapter ?

MERKATOR · Published in 2015-11-18 22:47:53

Yeah. thanks @Loboris!
All compiles & works fine!
Tested:
Nginx 1.9.6@latest
php5.6.7
phpMyAdmin@latest
MariaDB 10 with jemalloc
redis@latest
Nodejs@latest
owfs@latest w all sup modules
GPIOlib@latest

root@jessika:~# (cd /mnt/1wire/ && ls)
01.67C6697351FF 22.F2FBE3467CC2 alarm settings statistics system
10.4AEC29CDBAAB 29.54F81BE8E78D bus.0 simultaneous structure uncached
root@jessika:~# owfs --version
/usr/lib/owfs/owfs version:
3.1p0
libow version:
3.1p0
root@jessika:~# php -v
PHP 5.6.7-1 (cli)
root@jessika:~# gpio readall
+-----+-----+----------+------+---+--OrangePiPC--+---+------+---------+---- -+--+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+----------+------+---+----++----+---+------+----------+-----+- ----+
| | | 3.3v | | | 1 || 2 | | | 5v | | |
| 2 | -1 | SDA.0 | | | 3 || 4 | | | 5V | | |
| 3 | -1 | SCL.0 | | | 5 || 6 | | | 0v | | |
| 4 | 6 | IO6 PA06 | OUT | 0 | 7 || 8 | | | TxD3 | | |
| | | 0v | | | 9 || 10 | | | RxD3 | | |
| 17 | -1 | RxD2 | | | 11 || 12 | 0 | OUT | IO1 PD14 | 1 | 18 |
| 27 | -1 | TxD2 | | | 13 || 14 | | | 0v | | |
| 22 | -1 | CTS2 | | | 15 || 16 | 0 | OUT | IO4 PC04 | 4 | 23 |
| | | 3.3v | | | 17 || 18 | 0 | OUT | IO5 PC07 | 5 | 24 |
| 10 | -1 | MOSI | | | 19 || 20 | | | 0v | | |
| 9 | -1 | MISO | | | 21 || 22 | | | RTS2 | | |
| 11 | -1 | SCLK | | | 23 || 24 | | | SPI-CE0 | | |
| | | 0v | | | 25 || 26 | | | CE1 | | |
| 0 | -1 | SDA.1 | | | 27 || 28 | | | SCL.1 | | |
| 5 | 7 | IO7 PA7 | OUT | 0 | 29 || 30 | | | 0v | | |
| 6 | 8 | IO8 PA8 | OUT | 0 | 31 || 32 | 0 | OUT | IO9 PG08 | 9 | 12 |
| 13 | 10 | IO10 PA9 | OUT | 0 | 33 || 34 | | | 0v | | |
| 19 | 12 | IO12PA10 | OUT | 0 | 35 || 36 | 0 | OUT | IO13PG09 | 13 | 16 |
| 26 | 14 | IO14PA20 | ALT3 | 0 | 37 || 38 | 0 | OUT | IO15PG06 | 15 | 20 |
| | | 0v | | | 39 || 40 | 0 | OUT | IO16PG07 | 16 | 21 |
+-----+-----+----------+------+---+----++----+---+------+----------+-----+- ----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+----------+------+---+--OrangePIPC--+------+----------+-----+- ----+

Copy code

ThunderBRZ · Published in 2015-11-21 00:37:06

Any help 4 kernel headers package?

jacer · Published in 2015-11-21 21:09:43

lymon replied at 2015-11-17 14:04
sounds like a problem with the wpa-supplicant package

is it installed ?

It is working now. I added the WIFI manually in the network connections. But start-up log shows kernel modules loading error, also LSB overides error with Debian Jessie.

wizard2015 · Published in 2015-11-22 05:00:05

Edited by wizard2015 at 2015-11-22 05:25

Does anyone know how to solve HDMI ovescan issue on the orange pi? Is there something like /boot/config.txt for the Orange Pi, similar to Raspberry Pi? Taken from here : http://www.webtechgadgetry.com/m ... resolution-monitor/
I am using Ubuntu 14.04.