Edited by gounthar at 2018-4-13 04:41

Hi,

I unpacked and put a new Sandisk micro SDHC Class 10 16GB with Android 7.0 downloaded from the Mega link and... nothing happened.
There is some current on the USB port (tried a small ventilator), but the display does not start, the ethernet port does not look connected (nothing displayed on my router) and even the keyboard does not work (no light).
Is there anything I have missed? I had no problem writing the image with Win32 Disk Imager, but Etcher told me the img was not bootable.

I then retried with Ubuntu Desktop beta, and I have a green light on the card, network blinking, and the keyboard works. Unfortunately, it only gives me tons of logs but nothing else.
Thanks.

You cannot install Netflix or Facebook with the android image with google play. How you can solve this problem?

For booting with Android image, burn with PhoexniCard, choose the 'Start Up' mode. The power led will light when the board boot up. For Ubuntu image, is the board enter into system, or only no output on screen?

Thanks a lot for your quick answer. I will do with Android what you told me to do.
Regarding Ubuntu, I have a console showing lots of logs, looping. After a few halt/start, I managed to get the XWindow system and a working system, but it was gone on the next reboot.
I have your version of Debian working at the moment.
Thanks for your work.

Edited by gounthar at 2018-4-13 19:49

I have written the image with PhoenixCard, and it worked wonder!
Thanks a lot!
I still have some problems because my screen at home can't cope with what is sent by the OnePlus when under Android (but it works when it's running Debian).
The newer screen at work can display what is sent by the OnePlus whatever the OS can be.
What could I setup so that my older screen can display something when running Android?

I still have to

• guess how to connect it through ADB
• how to stop/reboot it
• how to setup a proxy
• how to make an OTG micro usb hub work (this one works with my Android phones for the keyboard, mouse, wifi dongle but nothing seems to work when using it on the Pi One Plus).
  

Is there any driver available to connect it through OTP to Windows? Windows can see it as a storage media, but I would need to get it seen as an Android device.

Anyway, thanks a lot for the good work, this thing is FAST!