I bought an Orange PI Plus 2. The green led is not working and it never boot in a single time. Red led always blink slowly and I waited about 20 min and not booting. I have to plug in and out too many times util it boots up.  What the hell is happening? Should I use Respberry PI instead for stability. Now I got a cancer.

Common phone chargers nowadays may not work properly as they are intended to "QuickCharge" your phone. So they MAY not have enough current output on 5 Volts.

Check serial console for debugging

Edited by KaungWai at 2018-4-24 13:06

Now, It's working fine. The problem is power supply. I used a 5V, 2A power bank and then tried 5V,1A. It behaves as I said above. When I use a samsaung phone charger 5V,1.5A, it working normally. But I'm not sure grren led is not working or still no need to blink. Do you know when the green led blink?

Usually the LED would light on when the board boot. And for booting, yes, if power supply is not enough, it would have difficulty to boot.