please choosego to mobile | Continue to access the PC version
View: 4580|Reply: 3

No output on the serial console from uboot

[Copy link]

1

threads

2

posts

11

credits

Novice

Rank: 1

credits
11
Published in 2019-3-29 17:50:07 | Show all floors |Read mode
I'm trying to see the uboot messages on the debug serial console which is next to the 5V input on OrangePI PC but there is nothing comming. The LAN port lights are lit I set the USB-to-TTL to 115200 bps the RX to TX , the TX to RX and GND-GND. Can it be a power problem or there is something wrong with the board and how can I test it ?

1

threads

2

posts

11

credits

Novice

Rank: 1

credits
11
 Author| Published in 2019-3-30 06:32:11 | Show all floors
With a card it booted armbian ! At least the board is fine ! Still what I read about the FEL mode is that the board should go into it if there is no card. Is it possible the u-boot messages to be on UART 2 or 3 ?

10

threads

218

posts

2040

credits

Gold member

Rank: 6Rank: 6

credits
2040
Published in 2019-3-30 22:16:44 | Show all floors
Edited by nopnop2002 at 2019-3-30 22:26

u-boot messages isn't show in latest Armbian.
I'd like to know how to show a u-boot message.

4

threads

96

posts

931

credits

Senior member

Rank: 4

credits
931
Published in 2019-3-31 15:19:37 | Show all floors
Did you power up the USB TTL adapter first or after powering the board? Yes, sounds like a stupid question but I had experience that the adapter had to be up first to get any output at all.
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list