please choosego to mobile | Continue to access the PC version
View: 6537|Reply: 4

Opi3 wireless drivers.

[Copy link]

3

threads

5

posts

31

credits

Novice

Rank: 1

credits
31
Published in 2019-5-9 05:48:43 from mobile | Show all floors |Read mode
Hi, today I have make a test with Armbian nigtly in my Orange pi 3, system boots but wireless interface seems to be missing. I think is a missing driver issue, somebody can tell me more about? Maybe I can find drivers around.

9

threads

634

posts

4398

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
4398
Published in 2019-5-9 13:08:17 | Show all floors
Images in development are missing this and that and its in most cases not something you can find on the internet and install. Xunlong has nothing to do with Armbian for Orangepi 3. It's community supported developed.

0

threads

1

posts

18

credits

Novice

Rank: 1

credits
18
Published in 2019-5-13 22:55:27 | Show all floors
Edited by jiapei100 at 2019-5-13 23:22

Exactly the same issue here...
Should we build the AP6256 driver for the kernel 5.1.0 ?Check this: https://lkml.org/lkml/2019/4/5/863

I believe the kernel comes with the support for this paricular driver, right?


Let me try

9

threads

634

posts

4398

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
4398
Published in 2019-5-14 14:57:18 | Show all floors
Edited by igorpec at 2019-5-14 08:05
jiapei100 replied at 2019-5-13 15:55
Exactly the same issue here...
Should we build the AP6256 driver for the kernel 5.1.0 ?C ...


Check this board:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts?h=next-20190514

It has been inside the kernel for more than 4 years, but was not possible to boot it for many years. I tried once this year, but it keep failing.

In short. This means nothing.

And BTW with Armbian, wireless works (with certain problems which is normal for hw under development).

2

threads

6

posts

40

credits

Novice

Rank: 1

credits
40
Published in 2019-6-4 20:34:14 | Show all floors
Edited by maxlinux2000 at 2019-6-4 20:39

Please open a terminal as root (or use sudo instead) and write:


  1. cp /lib/firmware/brcm/brcmfmac4356-sdio.bin /lib/firmware/brcm/brcmfmac43456-sdio.bin
  2. cp /lib/firmware/brcm/brcmfmac4356-sdio.txt /lib/firmware/brcm/brcmfmac43456-sdio.txt

  3. reboot
Copy code


regards
MaX

You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list