Sorry, i can see it on your web, http://www.igorpecovnik.com/2013/12/10/micro-home-server/.

Great job.

From left to right.

First there is a power socket connected to 72Watt PSU, down there are two small 220V GPIO / relay controlled sockets. Next is gigabit fiber optics convert which is at the moment wired to router and router is wired back to Orange. I am planning to add one more ARM board which will operate as router - Olimex Lime. Next to the fiber converter is 12V to 5V converter with 4 x USB charger (1-2A), down from converter is a power and I2C concentrator (home made) + audio amplifier 2 x 3W, down 3T hdd, than Orange Pi, then BMP180 sensor for measuring inside box temperature, than there is additional Ethernet panel for future olimex board, than light meter. There are two PIR sensors attached to wires. One is looking strait below display, one is on the right side. There are few things missing: wifi antenna, outside temperature and humidity sensor DHT22.

More details:
http://www.igorpecovnik.com/2013/12/10/micro-home-server/

Firstly, congratulations for your awesome work, that was just amazing!

However, I've tried running your latest image (Orangepi_Debian_1.1_wheezy_3.4.106.raw) on my Orange Pi Mini board but it freezes on boot.

This is the boot output captured via serial:

https://gist.github.com/emachado/b6f633a420c465edc47d

Do you have any idea about what it is happening? It looks quite similar to the problem I'm facing when trying to boot Lubuntu 14.04 image (posted here http://www.orangepi.org/orangepi ... &extra=page%3D1) and I'm afraid this is not supported on Orange Pi Mini

Thanks and regards.

its a PS problem. Try with  a more powerfull one

Thank you for the help! I've ordered a DC adapter and will retry it soon.