Orange Pi PC Plus loads and it fails !!!

Stroke_papy · Published in 2020-11-9 23:09:11

Hello
I have an Orange Pi PC Plus I loaded Armbian but when I reboot now the pi loads and it fails !!!

I tried with ubuntu, Android, debian and all bugs !!

Why ???

Thank you so much

U-Boot SPL 2019.04 (Nov 05 2019 - 21:07:23 +0800)
DRAM: 1024 MiB
Trying to boot from MMC1
U-Boot 2019.04 (Nov 05 2019 - 21:07:23 +0800) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi PC Plus
DRAM: 1 GiB
MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... Unable to use mmc 1:1... In: serial
Out: serial
Err: serial
Net: phy interface0
eth0: ethernet@1c30000
230456 bytes read in 14 ms (15.7 MiB/s)
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
USB2: USB EHCI 1.00
USB3: USB OHCI 1.0
USB4: USB EHCI 1.00
USB5: USB OHCI 1.0
USB6: USB EHCI 1.00
USB7: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning bus 3 for devices... 1 USB Device(s) found
scanning bus 4 for devices... 1 USB Device(s) found
scanning bus 5 for devices... 1 USB Device(s) found
scanning bus 6 for devices... 1 USB Device(s) found
scanning bus 7 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Autoboot in 2 seconds, press <Space> to stop
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
3700 bytes read in 3 ms (1.2 MiB/s)
## Executing script at 43100000
U-boot loaded from SD
Boot script loaded from mmc
86 bytes read in 1 ms (84 KiB/s)
5876450 bytes read in 281 ms (19.9 MiB/s)
7745856 bytes read in 370 ms (20 MiB/s)
Found mainline kernel configuration
30628 bytes read in 4 ms (7.3 MiB/s)
## Loading init Ramdisk from Legacy Image at 43300000 ...
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 5876386 Bytes = 5.6 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
EHCI failed to shut down host controller.
Loading Ramdisk to 49a65000, end 49fffaa2 ... OK
Loading Device Tree to 499f5000, end 49a64fff ... OK
Starting kernel ...
Loading, please wait...
starting version 229
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/mmcblk0p2 does not exist. Dropping to a shell!
Rebooting automatically due to panic= boot argument
[ 53.109810] reboot: Restarting system
U-Boot SPL 2020.04-armbian (Sep 02 2020 - 10:21:09 +0200)
DRAM: 1024 MiB
Trying to boot from MMC2
U-Boot 2020.04-armbian (Sep 02 2020 - 10:21:09 +0200) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi PC Plus
DRAM: 1 GiB
MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... Unable to use mmc 1:1... In: serial
Out: serial
Err: serial
Net: phy interface0
eth0: ethernet@1c30000
starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1b000: USB EHCI 1.00
Bus usb@1c1b400: USB OHCI 1.0
Bus usb@1c1c000: USB EHCI 1.00
Bus usb@1c1c400: USB OHCI 1.0
Bus usb@1c1d000: USB EHCI 1.00
Bus usb@1c1d400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning bus usb@1c1b000 for devices... 1 USB Device(s) found
scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
scanning bus usb@1c1c000 for devices... 1 USB Device(s) found
scanning bus usb@1c1c400 for devices... 1 USB Device(s) found
scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
scanning bus usb@1c1d400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Autoboot in 1 seconds, press <Space> to stop
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3967 bytes read in 1 ms (3.8 MiB/s)
## Executing script at 43100000
U-boot loaded from eMMC or secondary SD
Boot script loaded from mmc
202 bytes read in 1 ms (197.3 KiB/s)
11493477 bytes read in 547 ms (20 MiB/s)
7788240 bytes read in 371 ms (20 MiB/s)
Found mainline kernel configuration
32586 bytes read in 4 ms (7.8 MiB/s)
4185 bytes read in 4 ms (1021.5 KiB/s)
Applying kernel provided DT fixup script (sun8i-h3-fixup.scr)
## Executing script at 45000000
## Loading init Ramdisk from Legacy Image at 43300000 ...
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 11493413 Bytes = 11 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
EHCI failed to shut down host controller.
Loading Ramdisk to 49509000, end 49fff025 ... OK
Loading Device Tree to 49498000, end 49508fff ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.

Copy code

Stroke_papy · Published in 2020-11-10 21:37:04

In fact the raspberry Orange Pi PC Plus mache but the UART port comes out of debugging when the HDMI output is activated the UART port is muted.

How to see the prompt and place a linux command with PuTTY, ....

Thank you

mohoh77104 · Published in 2022-1-1 16:37:09

siliconvalleyrecovery Silicon Valley Recovery Roundtable Delivers Roadmap to a “Better Normal” for Community—Immediately & Long Term. Mountain View, Calif. https://siliconvalleyrecovery.com/

celinedion · Published in 2023-8-7 11:47:33

You can check the checksum or hash of the downloaded image mapquest directions to ensure its integrity.

zetisaop · Published in 2023-8-21 11:47:32

Fostering strong relationships and seeking support Geometry Dash when needed are also vital steps toward maintaining emotional equilibrium.

andree23 · Published in 2023-9-13 17:23:09

subway surfers online offers endless hours of fun and entertainment. The different locations and settings add variety to the gameplay.

panda90 · Published in 2023-11-4 16:31:55

I appreciate your posting. I've read about a lot of related subjects! Contrary to other articles, yours left me with a really distinct impression. I hope you'll keep writing insightful posts like this one and others for us to everyone to read! retro games

articleonlineki · Published in 2023-11-5 22:34:37

I’m empowered together with the surpassing plus preachy detailing for you to decorate such minimal timing. best ghostwriting services

articleonlineki · Published in 2023-11-8 23:26:52

That i taken aback when using the exploration everyone intended to get this to selected present astounding. Terrific process! Cafe Restaurant Seminyak

klestaum · Published in 2023-11-9 15:01:33

This post was finally edited by klestaum at 2023-11-9 15:04

The first level will show a picture of how the controls work. Once you get your dragon close enough, it will consume the prey.

geometry dash subzero