login|Register
Forum > Slackware
Post|
看38291|回32|Favorite
l4m3rx 看全部
2016-8-5 17:34:17
First i wanna thank Mara for taking the time and making the slackware images Great work!
I've tested [url=http://www.orangepi.org/orangepibbsen/%22http://dl.fail.pp.ua/slackware/o ... ild-20160714.img%22]slack-current-miniroot_03Jul16-3.4.112-orange_pi_plus_2e-build-20160714.img[/url] on OrangePi PC , it seems to work fine, except the LAN driver and rtl8192cu. (Patches missing?)Everything else seems to work just fine. I haven't had time to test and see if the images with the 4.6 and 4.7rc will work.The most  easy temporary solution to the missing kernel patches is to get the kernel,firmware and modules from armbian.




mara 看全部
2016-9-4 03:21:08
build images as hard float OS!


dx.l 看全部
2016-12-12 02:28:03
Hello mara!
I've trying to use your last image with hard float. From SD it works  fine.
But when I trying to install slackware on emmc - it's faild to boot from it.
All i've got is:
"U-Boot SPL 2016.07 (Sep 01 2016 - 21:48:36)
DRAM: 2048 MiB
Could not determine boot source

resetting ..."
And so on continuously.

I think it's because of different emmc flash on my "oprange PI plus 2" and the "plus 2E" boards.
At the previous soft float image, boot from emmc works good.

So, do you think the problem is a new mainline u-boot?
If it is so, can i compile and install u-boot in emmc separately after doing "setup.sh"?
mara 看全部
2017-1-14 05:07:13
Hello dx.l,

before running setup.sh, you can try to copy the old file to download /boot/u-boot-sunxi-with-spl.bin
I will try to update the image of the last u-boot
mara 看全部
2017-1-14 22:59:40
the problem was in the configuration u-boot, recognition eMMC was incorrectly set up, as well as in the creation of FS transport script. commit, commit

currently fixed, and create new images http://dl.fail.pp.ua/slackware/orange_pi_plus_2e/

OrangePi En

Powered by Discuz! X3.4

homepage|Simple edition|Touch edition|PC