here is HOW TO BURN ANDROID INTO OPi+ EMMC

jackblues

didacgil9 replied at 2016-1-5 05:52
I have tried to follow the process, mainly to delete the image I have in the EMMC, and I do not get  ...

try again, but this time disconect your  board from all devices before insert sd card. then conect power and finally conect the screen. probably the screen gives some power to board previously and there was the problem.
i'm working on my second board and i had the same problem... i did as i said to you and it worked well

didacgil9

Thanks Jackblues, I have tried that as well, and nothing.
I only managed to install a firm into the EMMC via the PhoenixSuite app. However, the image that I want to install, Tronfy for Opi+, does not get into the EMMC this way.
If I install the Android image provided by Orangepi.org, then I can boot and I can read the content of the SDCard, therefore, I do not thinks that the SDCard reader is broken.

All this is only to place the Tronfy image into the OrangePi Plus, because the mod version for OrangePi-PC does not activate the USB, therefore I can not pass from the "select language" step.

Do you have any other suggestion?