Please select To the mobile version | Continue to access the desktop computer version

OrangePi

 Login            
 Register            
Search
Hot search: orangepi
View: 1144|Reply: 1

Allwinner A40i for Industrial control gateway design

[Copy link]

13

Threads

36

Posts

137

Credits

Registered member

Rank: 2

Credits
137
Post time 2021-7-15 17:02:24 | Show all posts |Read mode
Allwinner A40i for Industrial control gateway design
this is a [[BPI 4.0 Server]] customization project base on [[Banana Pi BPI-M2 Berry]] and [[Banana Pi BPI-M2U]],use Allwinner A40i chip design

Pioneering connections at the same time both at home and abroad nearly site electrical/iot devices of large intelligent gateway/video front-end equipment, set protocol conversion, video transmission/access control, electrical IO quantity acquisition control, embedded SCADA system four big functions as one, with the passage of the data/video control center to form unified, have the margin calculation function;It completely eliminates the chronic disease and pain point that video monitoring is independent of data monitoring for a long time and is kidnapped by the expensive overall scheme of video manufacturers. It can replace the computer monitoring computer system with X86+Windows architecture on the spot and has the best cost performance.

The product features

*Data protocol processing, video protocol processing, electrical IO quantity processing, embedded SCADA system "four in one" Protocol and edge calculation function secondary development ability, support C/ expression/ladder diagram /Java/Python application programming
*1000+ sets of practical application cases, suitable for many industrial Ethernet, Internet of things application scenarios
*Embedded SCADA function, connected to the display screen or published through Web, replace the original X86+Windows conventional SCADA system function

==Product introduction==
* this product have large industrial Internet of things intelligent gateway is a new generation of Internet of things access equipment, equipped with 2 independent IP Ethernet and 8 RS485 interface, flexible configuration, widely used in power, oil, factories and mines, and the Internet of things industry automation monitoring occasions.
*In order to meet the complex electrical and gas access requirements, CS6000N has designed three extensible IO slots. Each IO slot can be configured as any one of 8XRS485, 8XDI, 8XDO or 8XAI IO boards according to the needs, providing flexible configuration combinations.
*it has built-in massive protocol interpretation library and real-time database, can connect various domestic and foreign protection devices, measurement and control devices, IEDs and other equipment, and support IEC61850.Special specifications can be customized according to user requirements;Open API is provided to facilitate users to develop proprietary software, which can be downloaded independently.
*supports access of hundreds of devices, data protocol parsing, conversion and unified transmission.
*it has another big characteristic, is a powerful video processing capabilities, including RTSP/RTMP video of push-pull flow, Onvif/GB28181 protocol stack and other video surveillance transmission function, for many manufacturers video front-end equipment (IPC and NVR) compatible with access, equipped with large capacity hard disk can replace the NVR, video footage and playback function, provides the industry's only data fusion + video solutions.
*supports complete SCADA system functions under 5000 points through HDMI display interface and USB keyboard and mouse (or touch screen).
*supports three configurations:
*Built-in Web management, query/configure the working parameters of the device through the browser
*Dedicated configuration software configures device parameters
*Cloud remote management, configuration and diagnosis of gateways through gateways, firmware and application upgrade
*it's uses advanced Icoupler ® digital isolation technology, RS485 automatic direction control, RS485 zero delay transmission technology, fully consider the particularity of industrial field application in the design, follow EMI/EMC design specifications, adapt to a variety of harsh industrial field and the Internet of Things site, ensure communication and a variety of IO semaphoretic reliability.

more ,please see wiki page

http://wiki.banana-pi.org/Awinne ... trol_gateway_design


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

155

Threads

1337

Posts

2951

Credits

Gold member

Rank: 6Rank: 6

Credits
2951
Post time 2021-11-30 11:46:51 | Show all posts

Awesome Automated Crossdocking Advice

What are the main advantages of Autonomous Mobile Robot?

1. Greater Flexibility
Autonomous Mobile Robots are able to adapt and fluid automation because of their dependence on cameras as well as onboard sensors. Autonomous Mobile Robots are able to create their own efficient paths within an organization. Autonomous Mobile Robots avoid following established routes, and are therefore open to new routes. Autonomous Mobile Robots have the ability to shift to new tasks faster than other automation techniques. Check out this Logistics robot info for more.

2. Safety - Increased
Autonomous Mobile Robots are jammed to gills by cameras and sensors. These enable the Autonomous Mobile Robot to understand and interpret its surroundings, which enables it to effectively travel within an area without hitting obstacles like product infrastructure, people or. In contrast, machines operated by human operators like forklifts don't have the same safety features and ultimately depend on human input. Autonomous Mobile Robots are not subject to the same risks as human operators. Human operators can be disoriented or tired, which can lead to accidents. Autonomous Mobile Robots are able to be utilized for repetitive tasks, which can reduce the risk of human error and improve safety in a facility.

3. Rapid Implementation
Autonomous Mobile Robots can be deployed in the course of an typical operation. It can take between four and six weeks, dependent on the specifics of each particular operation. It is crucial to pick the software and warehouse execution programs that the units need to be integrated with. Even at the top end the system is still a relatively short period in comparison to other technologies. To give an example, it can take up to a year to implement a goods–to-person (G2P), system.

4. Scalability
Autonomous Mobile Robots can be integrated into a facility in a relatively simple manner. They can be implemented using a modular deployment method, starting with a few units and adding more as you need them. This lets you avoid an incredibly high initial investment since instead of purchasing a massive amount of Autonomous Mobile Robots all at once the best option is to begin with two or three and then add to your fleet over time. This modular deployment gives you money to invest in other projects, in addition to allowing you to analyze the effect Autonomous Mobile Robots have had on your business and decide on the next steps.

5. It is easy to move between facilities
Certain operations might not be willing to consider automated options when they are aware that the move to a new facility is imminent. This logic makes sense to ask: why would you implement a new system if it will have to be removed in two years once the new facility is built? Autonomous Mobile Robots can help to bridge the gap between these two scenarios. Autonomous Mobile Robots can be deployed quickly and easily between facilities, which allows automation in the short-term. Alongside operations that are expecting an imminent move the Autonomous Mobile Robot can be a boon for companies setting up an interim holiday business.
You have to log in before you can reply Login | Register

Points Rules

Archiver|Mobile edition|Darkroom|OrangePi En ( 粤ICP备14086627号-2

2022-1-18 09:43 GMT+8 , Processed in 0.030821 second(s), 23 queries .

Powered by Discuz! X3.2

© 2014-2015 orangepibbs en.

Quick Reply To Top Return to the list