login|Register
Forum > Debian
Post|
看30149|回6|Favorite
lupin982 看全部
2015-11-20 02:07:41
Please onyone can help me to use this display:
http://www.ebay.it/itm/161857872767?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I'm trying with "LCD_show.tar.gz" driver
http://www.waveshare.com/wiki/3.5inch_RPi_LCD_(A)
on debian and on raspbian but It does not work.

Thanks,
Francesco

majsi 看全部
2015-11-22 06:07:32
This driver package is for RPI2 (is not compatible)
And this displays is not for Orange pi. Orange pi dont have spi0-cs1 on pin 26. You must create own driver to SPI what using PA21(pin 26) as cs1.
lupin982 看全部
2015-11-24 01:42:17
Is there a spi touch display for orangepi?
I think the support for the orange pi pc is not yet very good. The wiki page is not completed and the compatibility with RPI is not real.
I can't find any information about compatible touch display.
Till now i found many difficulties to use gpio, spi and i2c via c or c++.
I hope the support will improve soon.
The device has great potential, but it has many problem, i.e. of the 3 usb using debian, only one works, the other 2 are not powered.
beee 看全部
2016-1-2 17:33:02
beee 看全部
2016-1-2 17:33:20
12NextPage

OrangePi En

Powered by Discuz! X3.4

homepage|Simple edition|Touch edition|PC