Forum > Openelec
fritz 看全部
2015-12-17 16:12:59
other issue I have seen is sometime it does not rebuild u-boot if you change DEVICE. resulting in having the wrong script.bin in the FAT partition.
Better clean it manualy before building for another DEVICE:
sudo PROJECT=H3 ARCH=arm DEVICE=xxx scripts/clean u-boot
or check script.bin on the FAT partition if it's ok.
That's it for now,
jernej 看全部
2015-12-18 02:00:28


lyoko replied at 2015-12-17 07:43
hey, good job jernej! you simply have done the impossible.
But i'm sorry to be so rude, can you show ...

I assume that you are interested only in CedarX codec?

Simple, I studied following code:
https://github.com/allwinner-zh/ ... sunxi-cedarx/SOURCE
https://github.com/linux-sunxi/libvdpau-sunxi/tree/h3-dev (this will come handy for direct rendering)

You can see that xbmca10 hw codec is almost the same as this for H3. Binary library was extracted from H3 media SDK provided by Steven although with some fixes also open source one can be used.

I also read a lot of forums but posts were mostly negative.

That's it. I hope you are not disappointed I noticed that everything is on the net and I was bit confused why no one put this together before.

fritz 看全部
2015-12-18 04:54:37
This is for you:
yeah, why not open source one?
jernej 看全部
2015-12-18 05:13:58
Edited by jernej at 2015-12-17 22:15

Yeah, you know, I buy this board for media center and I want it operational ASAP

EDIT: Seriously, I went with easiest approach.
fritz 看全部
2015-12-21 00:29:38
Well, the easiest approach is not always "the best".

OrangePi En

Powered by Discuz! X3.4

homepage|Simple edition|Touch edition|PC