login|Register
Forum > Openelec
Post|
看20849|回24|Favorite
fritz 看全部
2015-12-13 03:02:13
Edited by fritz at 2015-12-20 17:31

Well, works here on my OPI Plus with mainline u-boot.
I had never thought that this Allwinner binary craplib would realy actually work.
But it does.

@jernej good work, looks not bad.
Thanks!

Supported devices:

code:

  1. DEVICE=HYH-TBH3
  2. DEVICE=OPiPlus
  3. DEVICE=OPi2
  4. DEVICE=OPiPC


build with:
sudo PROJECT=H3 DEVICE=xxx ARCH=arm make image

PS. I don't provide ready images!
jernej 看全部
2015-12-13 05:31:47
Thanks,

care to share your patch for mainline u-boot?
fritz 看全部
2015-12-14 18:09:39
Edited by fritz at 2015-12-16 00:07

Sure.
It will be There

You can try now:
sudo PROJECT=H3 ARCH=arm DEVICE=OPi2 make image
jernej 看全部
2015-12-16 08:03:41
Edited by jernej at 2015-12-16 01:08

quote:

fritz replied at 2015-12-14 11:09
Sure.
It will be There

Great, thanks. I will merge it in my branch. It would be great if Orange Pi PC is added, though.

There is no difference in the operation after boot?

fritz 看全部
2015-12-16 21:24:22
Edited by fritz at 2015-12-16 14:32

OPiPC is added.
I have only removed "wifi.conf", OPiPC has no wifi.
kernel_config (linux.arm.conf) is the same as OPi2, should work.
maybe if someone can test it, i don't have this device.
for building:
sudo PROJECT=H3 ARCH=arm DEVICE=OPiPC make image

For the supported devices i will update first post, but I don't think that I will maintain it for a long time.

1234.. 5NextPage

OrangePi En

Powered by Discuz! X3.4

homepage|Simple edition|Touch edition|PC