Hello, I am beginners
My Orange PI Plus card starts under a graphic mode (Android) I think ?
but with Chinese texts
Can one pass those in French and how?
Did I install Raspbian on my SD but don't I know how Boot Raspbian since this one?
Thank you for your assistance
sorry for my bad English
Essayez avec cette image (link), c'est la meilleur que j'ai troué, Il est construit pour O ...
Bonjour,
Je confirme, ENFIN une image qui semble fonctionner correctement. Un couac lors de la mise à jour mais en relancant un apt-upgrade, tout s'est remis en ordre !
You need to change the language like you'd do on any android phone. As for the second part, I don't really understand what you're trying to convey, could you elaborate more???
1-part) considering the Chinese menu I do not find the site to change the language into French
2-part) I wish with the starting of the map orangepi which it launches directly a linux (Ubuntu) of which I copied the image (ubuntu_orangepi.img.xz) from map SD placed in the TF card Slot
But orangepi starts only in Android mode
How to make for “booter” directly Ubuntu on the TF card?
Merci
Hi, for the question 1, just open the settings and scroll the menu looking for the icon with the letter A. This indicates you are getting into the language menu. The first option in that menu is for the language selection. Scroll and pick Catalán ;) For the second question, it is a bit longer to explain. First get an SDCard big enough to host the image. You may have done that already. Format it using the SDFormatter tool. Later, open the PhoenixCard 3.10 and format the card again. Later select the image you want to burn into the Orange Pi, and select the Startup! option and click on Burn. It will take a while to get it burnt. Finally, disconnect the OrangePi from all source of electricity (this means the Vcc, USBs and HDMI). Place the SDCard inside and then plug the power and HDMI. if instead of wanting to boot from the SDCard you would like to transfer the image to the EMMC, follow the same steps but select Product instead of Startup! Sorry for not writing intros, but I can't from the mobile phone.