Difference between revisions of "Orange Pi Zero 2"
(Created page with "__TOC__ == '''Basic Features of Orange Pi Zero 2''' == <br> === '''What is Orange Pi Zero 2''' === <br> Orange Pi is an open source single-board -computer, a new generation of...") |
(No difference)
|
Revision as of 15:40, 27 June 2022
Contents
Basic Features of Orange Pi Zero 2
What is Orange Pi Zero 2
Orange Pi is an open source single-board -computer, a new generation of arm64 development boards, which can run Android TV 10, Ubuntu and Debian . The Orange Pi Zero 2 uses the Allwinner H616 Rockchip and has 1GB DDR3 .
Purpose of Orange Pi Zero 2
We can use it to build:
- A small Linux system computer
- A small Linux web server
- Install Klipper host computer to control 3D printer
- Android TV box
Of course, there are other more functions, because the Orange Pi development board can install Linux systems such as Debian and Ubuntu, and Android TV system, which means that we can implement a variety of functions within the scope of the development board hardware and software support.
Who is Orange Pi Zero 2 designed for?
Orange Pi Zero2 is for anyone who wants to start creating with technology – not just consuming it. It's a simple, fun, useful tool that you can use to start taking control of the world around you.
Hardware Features of Orange Pi Zero 2
| colspan=2 | Hardware Introduction
|
| CPU | Allwinner H616 64-bit high-performance Quad-core Cortex-A53 processor |
| GPU |
Mali G31 MP2 |
| Memory(SDRAM) | 1GB DDR3 (Shared with GPU） |
| Onboard Storage | TF card slot、2MB SPI Flash |
| Onboard Network | Support 1000M/100M/10M Ethernet |
| WIFI+BT | * AW859A Chip、Support IEEE 802.11 a/b/g/n/ac、BT5.0 |
| Video Outputs |
|
| Audio output |
|
| Power Source | USB Type C interface input |
| USB 2.0 Ports | 3*USB 2.0 HOST（Two of them are via 13pin interface board） |
| 26pin header | With I2Cx1、SPIx1、UARTx1 and multiple GPIO ports |
| 13pin header | With USB 2.0 HOSTx2、TV-OUT、LINE OUT、IR-RX、and 3*GPIO ports |
| Debug serial port | UART-TX、UART-RX and GND |
| LED | Power led & Status led |
| IR receiver | Support IR remote control (via 13pin interface board) |
| Supported OS | Android10 TV、Ubuntu、Debian and so on |
| colspan=2 | Appearance specification
|
| Dimension | 85mm×56mm |
| Weight | 30g |
| colspan=2 |  range Pi™ is a trademark of the Shenzhen Xunlong Software Co.,Limited |
