8,367
edits
Changes
→How to install wiringOP
<li><p>Test the output of the gpio readall command as follows</p>
<ol style="list-style-type: lower-alpha;">
<li><p>There is a one-to-one correspondence between pins 1 to 26 and 26 > Pins on the development board</p></li>
<li><p>Pin 27 corresponds to pin 10 of 13pin on the development board</p></li>
<li><p>Pin 29 corresponds to pin 11 of 13pin on the development board</p></li>