Changes

Jump to: navigation, search

Orange Pi R1

747 bytes removed, 09:46, 24 June 2022
Orange Pi Introduction
__TOC__
== '''Orange Pi R1 Introduction''' ==
<br>
=== '''What is Orange Pi PrimeR1?''' ===
<br>
 It’s an open-source single-board computer. It can run Android 54.14, Ubuntu, Debian, Rasberry Pi Armbian Image, it . It uses the AllWinner H5 H2 SoC, and has 2GB 256MB DDR3 SDRAM.<br>
<br>
=== '''What can I do with Orange Pi PrimeR1?''' ===
<br>
You can use it to build...<br>
* Scratch
* ......
* Pretty much anything else, because Orange Pi Prime R1 is open source
<br>
=== '''Whom is it for?''' ===
<br>
 Orange Pi Prime R1 is for anyone who wants to create with technology– not just consuming. It's a simple, fun, useful tool and you can use it to take control of the world around you.<br>
<br>
=== '''Hardware specification of Orange Pi PrimeR1''' ===
<br>
{| class="wikitable" style="width:800px;background:#ffffff;"
| colspan=2 | <div style="text-align:center;font-weight:700;">Hardware specification</div>
|-
| CPU|| H5 H2 Quad-core Cortex-A53 64bitA7 H.265
|-
| GPU||
Mali450 Mali400MP2 GPU including dual Geometry <br>Processors(GP) and quad Pixel Processors<br>@600MHz, Supports OpenGL ES 2.0 and OpenVG1.1 <br>3000Mpix/sec and 163Mtri/sec<br>Full scene over-sampled 4X anti-aliasing engine with no additional bandwidth usage
|-
| Memory (SDRAM) || 2GB 256MB DDR3 (shared with GPU)
|-
| On-board Storage||
TF card (Max. 32GB)/NOR Spi flash(2MB16MB)
|-
| On-board NetworkWifi Antenna|| 1000/100M Ethernet RJ45Yes
|-
| Onboard WIFI+BTOn-board Network|| 8723BS, IEEE 802.11 b100M/g10M Ethernet RJ45 (on board Ethernet ) <br>100M/n,BT4.010M Ethernet RJ45 (RTL8152B )
|-
| Video InputOnboard WIFI|| A CSI input connector Camera:<br>Supports 8-bit YUV422 CMOS sensor interface <br>Supports CCIR656 protocol for NTSC and PAL<br>Supports SM pixel camera sensor<br>Supports video capture solution up to 1080p@30fpsRTL8189ETV, IEEE 802.11 b/g/n
|-
| Audio Video Input|| MICSupport output via 13pin(AV-out)
|-
| Video Outputs|| Supports HDMI Support output with HDCP <br>Supports HDMI CEC<br>Supports HDMI 30 functionvia 13pin(cvbs)
|-
| Audio OutputPower Source|| 3.5 mm Jack and HDMIUSB OTG can supply power
|-
| Power SourceButtons|| DC input can supply power USB OTG input can supply powerPower button
|-
| USB 2.0 Ports|| Three USB 2.0 Host, one USB 2.0 OTG|-| Low-level peripherals|| 40 26 Pins Header,compatible with Raspberry Pi B+13 Pins Header, with 2x USB, IR pin, AUDIO
|-
| GPIO(1x3) pin|| UART, ground.
| LED|| Power led & Status led
|-
| Buttons|| Power Button(SW2), Reset Button (SW4)|-| Key|| IR Input, Power, Reset|-| Supported OS|| Android , Lubuntu, Debian, Raspberry Pi Armbian Image
|-
| colspan=2 | <div style="font-weight:700;text-align:center;">Interface definition</div>
|-
| Product size|| 98mm 45mm × 60mm
|-
| Weight|| 75g48g
|-
| colspan=2 | Orange Pi™ is a trademark of the Shenzhen Xunlong Software CO., Limited
|}
<br>
'''Top view of Orange Pi Prime'''<div>[[文件:Orange-pi-prime-img1.png|500px]]</div><br>'''Bottom view of Orange Pi Prime'''<div>[[文件:Orange-pi-prime-img2.png|500px]]</div><br>'''Interface instructions of Orange Pi Prime'''
<div>[[文件:Orange-pi-prime-img3.png|600px]]</div>
<br>

Navigation menu