Orange Pi 2G-IoT

From Wiki-Orange Pi
Revision as of 10:08, 28 June 2022 by Admin (talk | contribs) (Created page with "__TOC__ == '''Orange Pi Introduction''' == <br> === '''What is Orange Pi 2G-IoT?''' === <br>  It’s an open-source single-board computer. It can run Android 4.4, Ubuntu,...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Orange Pi Introduction


What is Orange Pi 2G-IoT?


 It’s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Raspberry Pi image. It uses the RDA8810 Soc, and has 256MB LPDDR2 SDRAM.

What can I do with Orange Pi 2G-IoT?


You can use it to build... 

  • A computer
  • A wireless server
  • Games
  • Music and sounds
  • HD video
  • A speaker
  • Android
  • Scratch
  • Pretty much anything else, because Orange Pi 2G-IoT is open source.


Whom is it for?


 Orange Pi 2G-IoT is for anyone who wants to create with technology– not just consuming. It's a simple, fun, useful tool and you can use it to take control of the world around you.

Hardware specification


colspan=2 Hardware specification
CPU ARM Cortex-A5 32bit
GPU

Separate graphic processor, Vivante's GC860
support OpenGLES1.1/2.0
support OpenVG1.4
support DirectFB
support GDI/DirecShow
30M Triangle/s, 250M Pixel/s

Memory (SDRAM) Integrated 256MB LPDDR2 SDRAM
Onboard Storage TF card / Integrated 500MB 8Bit 1.8V 4K SLC Nand Flash
Onboard WIFI+BT RDA5991, WIFI+BT
2G model

The four frequency single card
GSM/GPRS Dedicated accelerators
SIM card

Video Input

A CSI input connector Camera:
Supports 8-bit YUV422 CMOS sensor interface
Supports CCIR656 protocol for NTSC and PAL
Supports SM pixel camera sensor
Supports video capture solution up to 1080p@30fps

Audio Input MIC, 3.5 mm Jack
Video Outputs LCD
Audio Output 3.5 mm Jack、 FM、SPEAK(Optional)
Power Source

USB OTG input can supply power
Battery input can supply power(Optional)

USB 2.0 Ports One USB 2.0 HOST, One USB 2.0 OTG
Buttons Power Button(SW602)
Low-level peripherals 40 Pins Header, compatible with Raspberry Pi B+
GPIO(1x3) pin UART, ground.
LED Power led
Supported OS Android, Ubuntu, Debian, Rasbian
cospan=2 Interface definition
Product size 67mm × 42mm
Weight 35g
colspan=2 Orange Pi™ is a trademark of the Shenzhen Xunlong Software CO., Limited


Top view

Orange-pi-2g-iot-img1.png


Bottom view

Orange-pi-2g-iot-img2.png


Interface instructions:

Orange-pi-2g-iot-img3.png


Orange-pi-2g-iot-img4.png


GPIO Specifications


 The CSI Camera Connector is a 24-pin FPC connector which can connect external camera module with proper signal pin mappings. The pin of CIS connector can be defined as follows. The connector marked with "CON 1" on the Orange Pi 2G-IOT is camera connector.

Orange-pi-i96-img3.png


OrangePi 2G-IOT-CSI

CON1-P01 NC
CON1-P02 GND
CON1-P03 TWI2-SDA PE13
CON1-P04 VCC-CSI
CON1-P05 TWI2-SCK PE12
CON1-P06 CSI-RESET# PE15
CON1-P07 CSI-VSYNC PE3
CON1-P08 CSI-STBY-EN PE15
CON1-P09 CSI-HSYNC PE2
CON1-P10 VDD1V8-CSI
CON1-P11 VCC-CSI
CON1-P12 CSI-D7 PE11
CON1-P13 CSI-MCLK PE1
CON1-P14 CSI-D6 PE10
CON1-P15 GND
CON1-P16 CSI-D5 PE9
CON1-P17 CSI-PCLK PE0
CON1-P18 CSI-D4 PE8
CON1-P19 CSI-D0 PE4
CON1-P20 CSI-D3 PE7
CON1-P21 CSI-D1 PE5
CON1-P22 CSI-D2 PE6
CON1-P23 GND
CON1-P24 AFVCC-CSI