Orange Pi 4

From Wiki-Orange Pi
Revision as of 17:15, 20 June 2022 by Admin (talk | contribs)
Jump to: navigation, search

Basic features of Orange Pi 4


What’s Orange Pi 4?


 Orange Pi is an open source single-board computer, a new generation of arm64 development board, which can run operating systems such as Android 8.1, Ubuntu and Debian. Orange Pi development board (Orange Pi 4) uses Rockchip RK3399 system-on-chip, and has dual-channel 4GB LPDDR4 memory

What can I do with Orange Pi 4?


We can bulid:

  • A computer
  • A wireless server
  • Games
  • Music and Sounds
  • HD video
  • A speaker
  • Android


Pretty much anything else,because Orange pi 4 is open source

Who’s it for?


 The Orange Pi development board is not only a consumer product, but also designed for anyone who wants to use technology to create and innovate. It is a very simple, interesting and practical tool, you can use it to create the world around you

Hardware Specification


Hardware Specification Introduction
CPU

Rockchip RK3399 (28nm HKMG process)
6-core ARM® 64-bit processor ,main frequency speeds up to 2.0GHz
Based on the large and small size core architecture of big.LITTLE:
Dual-core Cortex-A72 (large core) + Quad-core Cortex-A53 (small core)

GPU
  • High-performance multi-core GPU Mali T864
  • OpenGL ES1.1/2.0/3.0/3.1
  • OpenVG1.1 OpenCL, DX11, AFBC
Memory Dual 4GB LPDDR4
Onboard Storage
  • 16GB EMMC (Default Empty)
  • TF card slot
Network 10/100/1000Mbps Ethernet( Realtek RTL8211E )
WIFI+Bluetooth
  • AP6256, IEEE 802.11 a/b/g/n/ac
  • BT5.0
Video Output

1 x HDMI 2.0 ( Type-A ), Supports 4K@60fps output
1 x DP 1.2 (Display Port) , Supports 4K@60fps output
Supports Dual MIPI-DSI (4 lines per channel)

Video Input MIPI-CSIx2 Camera connector (MIPI_RX0、MIPI_TX1/RX1)
Audio Output
  • 3.5mm Jack
  • HDMI2.0a
Audio Input
  • Onboard MIC
  • Headphone recording
Power Source
  • DC 5V/3A or DC 5V/4A
  • TYPE-C 5V/3A or TYPE-C 5V/4A
USB Port
  • USB2.0 HOST x 2
  • USB3.0 HOST x 1
  • USB3.0 Type-C x 1
Low-level peripherals GPIO1 40 pins (with I2Cx2、SPIx1/UART and GPIOx8)
Mini-PCIE 24pin mini-PCIE interface
RTC Support RTC,on-board battery backup interface
Debug Serial Port UART-TX、UART-RX and GND
LED Power led & Status led
Button Reset x1、Upgrade x1
Support OS Android8.1、Ubuntu、Debian
Appearance specification introduction
Dimension 91mm×55.7mm
30px|range Pi™ is a trademark of the Shenzhen Xunlong Software CO., Limited


Top View and Bottom View of Orange Pi 4


Top View:

800px|


Bottom View:

800px|


Orange Pi 4 interface details


With 16GB EMMC Version


800px|


Without 16GB EMMC Version


800px|


Introduction to the use of the development board


Prepare the necessary accessories


1)TF card, a high-speed card of class 10 or higher with a minimum capacity of 8GB, it is recommended to use SanDisk TF card, Orange Pi test is to use SanDisk TF card, other brands of TF card may have the problem of system failure

300px|

2)TF card reader, used to read and write TF card

300px|

3)HDMI to HDMI cable, used to connect the development board to an HDMI monitor or TV for display

300px|

4)Type-C to HDMI cable, connect the development board to the HDMI monitor or TV through the Type-C interface for display

300px|

5)Type-C to USB3.0 adapter, used to connect USB3.0 storage devices or mouse keyboards and other devices

300px|

6)10.1 inch MIPI screen, used to display the system interface of the development board

300px|

7)Power adapter, 5V/3A or 5V/4A high-quality power adapter, the Type-C USB3.0 interface of the development board can also be used for power input

300px| 300px|

8)USB interface mouse and keyboard, as long as it is a standard USB interface mouse and keyboard, the mouse and keyboard can be used to control the Orange Pi development board

9)100M or Gigabit network cable, used to connect the development board to the Internet

10)OV13850 13 million camera, Orange Pi 4 dedicated camera, compatible with MIPI interface

300px|


11)USB to TTL module and DuPont cable. When using the serial port debugging function, USB to TTL module and DuPont cable are required to connect the development board and the computer

300px| 300px|


12)A personal computer with Ubuntu and Windows operating systems

1 Ubuntu14.04 PC Optional, used to compile Android source code
2 Ubuntu18.04 PC Optional, used to compile Linux source code
3 Windows PC Used to burn Android and Linux images


Download the image and related information of the development board


1)The download URL of the Chinese version is

 http://www.orangepi.cn/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-4.html
800px|


2)The download URL of the English version is

 http://www.orangepi.org/downloadresources/
800px|


3)The information mainly contains

a.Android source code: saved on Baidu Cloud Disk and Google Cloud Disk
b.Linux source code: saved on github, the link address is

 https://github.com/orangepi-xunlong/orangepi-build

c.User manuals and schematic diagrams: chip-related data manuals will also be placed here
d.Official tools: mainly include the software that needs to be used during the use of the development board
e.Android image: saved on Baidu Cloud Disk and Google Cloud Disk
f.Ubuntu image: saved on Baidu Cloud Disk and Google Cloud Disk
g.Debian image: saved on Baidu Cloud Disk and Google Cloud Disk
h.Armbian image link, a image developed and maintained by the Armbian community. If you encounter any problems during use, please go to the armbian forum to give feedback. The maintainer of the Armbian image and other people who use the Armbian image will assist in solving various problems. Is the fastest way to solve the problem. Orange Pi is not responsible for maintaining this image